Alamo T 7740 manual Buzz Bar Drive Coupling Design change

TECHNICAL INFORMATION BULLETIN No. 041101

Alamo Industrial ™ Technical Services Department

1502 East Walnut

Seguin, Texas 78155

830-372-2708

Models: All Alamo Industrial Products using the Buzz Bar Head are affected.

Bulletin No:

041101

Date:

Apr. 11, 2001

Buzz Bar Drive Coupling Design change:

There has been a design change to the drive coupler assembly for the Buzz bar Cutting Head. If a flexible cou- pler, Alamo Industrial P/N 02974245 (for Machete) or P/ N 02974246 (for A-Boom & Slopemower), are ordered they will be a different design. The new flexible coupler design will be molded rubber with metal inserts. The new molded rub- ber version will directly replace the machined design using the same part number. An instal- lation drawing, that describes the assembly in detail, will be shipped if a new coupler is ordered. this bulletin is to in- form you of the design change (see Figure 1) If there are further questions please con- tact Alamo Industrial's Techni- cal Service Department. Also See Manual Insert Sheet P/N 02978337.

Motor

Flexible Coupler

Hub

Pulley Sheave

Figure 1

This document does not authorize the repair or replacement of parts under warranty

MACHETE

© 2005 Alamo Group Inc. 1-42