ASSEMBLY
Assembling Quick Attach Device
Quick attach device can be installed using tools ordinarily available. Torque all hardware to specifications listed in loader operator’s manual. Shut off the tractor engine and engage the tractor brakes during installation.
Only quick attach, skid steer compatible attachments can be used with the quick attach device. Pin on style attachments can be used on the loader, but necessitate removal of the quick attach device and relocation of the bucket level indicator.
All references to left and right used in these instructions are as they would appear to the operator standing at the rear of the unit facing forward.
1.Quick attach device is
2.Unband the quick attach device and wood blocks. (Figure
3109 01/11 | Assembly Section |
© 2011 Alamo Group Inc.