Alamo 3109 manual Standard Equipment and Specifications

OPERATION

1.Standard Equipment and Specifications

Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader equipped with a 68” pin on bucket, external hydraulic system of 10 GPM with engine operating at 2600 RPM and relief setting of 2500 PSI.

Horsepower Range		30-50 HP
System pressure/flow rate		2500 PSI/ 10 GPM
Lift Capacity to maximum height		1320 lbs.
Breakout force at pivot pin		4410 lbs.
Rollback force at ground line		3030 lbs.
Total weight with bucket (approx.)		980 lbs.
Raising time to full height		4.97 seconds
Lower time		3.42 seconds
Attachment dump time		2.47 seconds
Attachment rollback time		3.19 seconds
Hydraulic system flow		10 GPM
System pressure at rated flow		2500 PSI
(A)	Maximum Lift Height at Pivot Pin	111”
(B)	Maximum Height Under Bucket	107
(C)	Clearance with Bucket Dumped	93”
(D)	Reach at Maximum Height	24”
(E)	Maximum Dump Angle	42°
(F)	Reach with Attachment on Ground	62”
(G)	Attachment Rollback Angle	20°
(H)	Digging Depth	5.5”
(I)	Overall Height in Carry Position	56” @ top of upright

(Manufacturers estimated specifications and design subject to change without notice.)

3109 01/11 Operation Section 4-3

© 2011 Alamo Group Inc.

OPERATION