Exmark 850 Thread Locking Adhesives, Mobil HTS Grease Or Food-Grade Anti-seize, Dielectric Grease

Page 24

Maintenance

9.Reinstall upper case half and fasten in place with six bolts previously removed.

10.Reinstall all parts removed in steps 3 and 4. Install drive belt and adjust tension as stated in the Transmission Belt Adjustment section.

Thread Locking Adhesives

Thread locking adhesives such as “Loctite 242” or “Fel-Pro, Pro-Lock Nut Type” are used on the following fasteners:

All belt drive pulley setscrews.

OPC lever setscrews.

Pulley retaining bolt in end of engine crankshaft.

Fuel tank bulkhead fitting threads

Adhesives such as “Loctite RC/609 or RC/680” or “Fel-Pro Pro-Lock Retaining I or Retaining II” are used on the following:

OPC lever hubs and cross-shaft

Note: Care must be used not to bond the bearing, next to each OPC hub, to the cross-shaft which could cause binding of the OPC levers and erratic operation.

Fuel tank studs, where studs are inserted into tank.

Mobil HTS Grease (Or Food-Grade Anti-seize)

Mobil HTS grease (or food-grade anti-seize) is used in the following locations:

Between the cutter housing spindle and bearings.

Between the cutter housing spindle and sheave.

Copper-Based Anti-seize

Copper-based anti-seize is used in the following locations:

Between the blade drive and transmission drive pulleys and engine crankshaft.

Between the transmission drive pulley and transmission drive shaft.

Between the bearings and sheaves and transmission output shafts.

Dielectric Grease

Dielectric grease is used on all blade type electrical connections to prevent corrosion and loss of contact.

24

Image 24
Contents Metro California Introduction Contents Safety Safety Alert SymbolSafe Operating Practices TrainingSafety Operation Slope OperationMaintenance and Storage Safety and Instructional Decals 403143 98-5954 103-1623 117-2718 103-5626 Specifications Model NumbersSystems Dimensions Torque RequirementsProduct Overview OperationControls Operator Presence Control OPC LeversOff-Run Switch Choke ControlThrottle Control Drive LeversPre-Start Operating InstructionsDriving the Machine For ECS HandlesTransporting Changing GearsTransporting a Unit Maintenance Recommended Maintenance SchedulesCheck Engine Oil Level Check Mower BladesReplacing the Discharge Deflector Check Safety Interlock System Service Air CleanerCheck for Loose Hardware Change Engine Oil Check Tire PressuresCheck Condition Of Belts Lubricate Grease FittingsCheck Spark Plugs Change Fuel FilterThread Locking Adhesives Mobil HTS Grease Or Food-Grade Anti-seizeCopper-Based Anti-seize Dielectric GreaseAdjustments Adjusting the Cutting HeightAdjusting the Axle Position Adjusting the Number of Spacers below Caster Support Hub Adjusting the Cutting Height with Blade SpacersAdjustment Wheel Drive Belt Pulley ScrapersEngine to Mower Deck Belt Transmission BeltBlade Brake Adjustment Inch Deck Shown for Reference OnlyBelt Guide Adjustment Brake and Wheel Drive Linkage AdjustmentLeft Side Shown Shifter Lever Adjustment Right Side of Unit ShownShifter Detent Adjustment PTO Safety Switch AdjustmentHandle Height Adjustment Wheel Drive Spring Tension AdjustmentClean Engine and Exhaust System Area Remove Engine Shrouds and Clean Cooling FinsClean Debris From Machine Clean Grass Build-Up Under DeckWaste Disposal Motor Oil DisposalTroubleshooting Problem Possible Cause Corrective ActionTroubleshooting Schematics Exmark Commercial Turf Equipment Page Page Service Record Date Description of Work Done Service Done ByThis page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 52 pages 62.21 Kb Manual 32 pages 16.59 Kb Manual 28 pages 32.2 Kb Manual 60 pages 29.4 Kb Manual 24 pages 21.56 Kb Manual 48 pages 5.05 Kb Manual 40 pages 46.04 Kb

00 & Higher, 850 specifications

The Exmark 850 is a top-of-the-line commercial mower, known for its durability, efficiency, and advanced features, making it a favorite among landscaping professionals. With a powerful engine and innovative technology, the Exmark 850 is designed to tackle tough mowing tasks while ensuring a high-quality cut.

One of the standout characteristics of the Exmark 850 is its robust engine performance. Powered by a reliable Kohler or Kawasaki engine, it delivers exceptional horsepower, enabling it to handle various terrains and grass types with ease. The engine is designed for fuel efficiency, allowing operators to work longer hours without frequent refueling, ultimately boosting productivity on the job.

The cutting deck of the Exmark 850 is engineered with precision, utilizing Exmark's proprietary UltraCut technology. This technology ensures that grass is cut evenly and efficiently, resulting in a clean, manicured appearance. The deck height is easily adjustable, allowing users to quickly change settings to accommodate different lawn conditions and preferences.

Another key feature is the innovative suspension system that enhances ride quality. The Exmark 850 is equipped with a heavy-duty front axle and high-performance suspension that absorbs bumps and uneven ground, allowing for a smoother mowing experience. This is especially beneficial for operators who spend long hours on the mower, reducing fatigue and improving comfort.

Ergonomics play a crucial role in the design of the Exmark 850. The operator station is thoughtfully crafted with optimal controls and comfortable seating, allowing for easy maneuverability and long-term use. The ergonomic handles and intuitive control layout make it easy for operators to navigate tricky landscapes, enhancing overall efficiency.

In terms of durability, the Exmark 850 is built to withstand the rigors of commercial use. The high-quality materials and construction ensure that this mower can handle challenging conditions, extending its lifespan and reducing maintenance needs. Additionally, Exmark offers an extensive warranty program, providing peace of mind for operators.

Safety features are also prioritized in the Exmark 850, with guards and shields designed to protect the operator while mowers are in use. These features also include emergency shut-off systems and blade brake systems, ensuring compliance with safety standards.

Overall, the Exmark 850 stands out as a high-performing, reliable, and efficient mower suitable for a variety of commercial landscaping tasks. With its powerful engine, advanced cutting technology, ergonomic design, and emphasis on durability and safety, it continues to be a top choice for professionals seeking high-quality lawn care equipment.