Exmark 00 & Higher, 850 Safety Alert Symbol, Safe Operating Practices, Training, Preparation

Page 5

Safety

Safety

Safety Alert Symbol

This Safety Alert Symbol (Figure 2) is used both in this manual and on the machine to identify important safety messages which must be followed to avoid accidents

This symbol means: ATTENTION! BECOME

ALERT! YOUR SAFETY IS INVOLVED!

Figure 2

1.Safety alert symbol

The safety alert symbol appears above information which alerts you to unsafe actions or situations and will be followed by the word DANGER, WARNING, or CAUTION.

DANGER: White lettering / Red background. Indicates an imminently hazardous situation which, if not avoided, Will result in death or serious injury.

WARNING: Black lettering / Orange background. Indicates a potentially hazardous situation which, if not avoided, Could result in death or serious injury.

CAUTION: Black lettering / Yellow background. Indicates a potentially hazardous situation which, if not avoided, May result in minor or moderate injury.

This manual uses two other words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention.

Safe Operating Practices

Training

Read the Operator’s Manual and other training material. If the operator(s) or mechanic(s) can not read English it is the owner’s responsibility to explain this material to them.

Become familiar with the safe operation of the equipment, operator controls, and safety signs.

All operators and mechanics should be trained. The owner is responsible for training the users.

Never let children or untrained people operate or service the equipment. Local regulations may restrict the age of the operator.

Only adults and mature teenagers should operate a mower, and even mature teenagers should have adult supervision. Be sure a teenager:

1.has read and understands the Operator’s Manual and recognizes the risks involved;

2.is sufficiently mature to use caution; and

3.is of sufficient size and weight to operate the controls comfortably and to manage the mower without taking risks.

The owner/user can prevent and is responsible for accidents or injuries occurring to himself or herself, other people or property.

Preparation

Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job. Only use accessories and attachments approved by Exmark.

Wear appropriate clothing including safety glasses, substantial footwear, long trousers, and hearing protection. Do Not operate when barefoot or when wearing open sandals. Long hair, loose clothing or jewelry may get tangled in moving parts.

CAUTION

This machine produces sound levels in excess of 85 dBA at the operator’s ear and can cause hearing loss through extended periods of exposure.

Wear hearing protection when operating this machine.

Inspect the area where the equipment is to be used and remove all rocks, toys, sticks, wires, bones, and other foreign objects which can be thrown by the machine and may cause personal injury to the operator or bystanders.

5

Image 5
Contents Metro California Introduction Contents Safety Alert Symbol SafetySafe Operating Practices TrainingSafety Slope Operation OperationMaintenance and Storage Safety and Instructional Decals 403143 98-5954 103-1623 117-2718 103-5626 Systems SpecificationsModel Numbers Torque Requirements DimensionsOperation Product OverviewControls Operator Presence Control OPC LeversChoke Control Off-Run SwitchThrottle Control Drive LeversOperating Instructions Pre-StartFor ECS Handles Driving the MachineTransporting a Unit TransportingChanging Gears Recommended Maintenance Schedules MaintenanceReplacing the Discharge Deflector Check Engine Oil LevelCheck Mower Blades Check for Loose Hardware Check Safety Interlock SystemService Air Cleaner Check Tire Pressures Change Engine OilCheck Condition Of Belts Lubricate Grease FittingsChange Fuel Filter Check Spark PlugsMobil HTS Grease Or Food-Grade Anti-seize Thread Locking AdhesivesCopper-Based Anti-seize Dielectric GreaseAdjusting the Cutting Height AdjustmentsAdjusting the Axle Position Adjusting the Cutting Height with Blade Spacers Adjusting the Number of Spacers below Caster Support HubWheel Drive Belt Pulley Scrapers AdjustmentEngine to Mower Deck Belt Transmission BeltInch Deck Shown for Reference Only Blade Brake AdjustmentBrake and Wheel Drive Linkage Adjustment Belt Guide AdjustmentLeft Side Shown Right Side of Unit Shown Shifter Lever AdjustmentPTO Safety Switch Adjustment Shifter Detent AdjustmentHandle Height Adjustment Wheel Drive Spring Tension AdjustmentRemove Engine Shrouds and Clean Cooling Fins Clean Engine and Exhaust System AreaClean Grass Build-Up Under Deck Clean Debris From MachineWaste Disposal Motor Oil DisposalProblem Possible Cause Corrective Action TroubleshootingTroubleshooting Schematics Exmark Commercial Turf Equipment Page Page Date Description of Work Done Service Done By Service RecordThis page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 52 pages 62.21 Kb Manual 32 pages 16.59 Kb Manual 28 pages 32.2 Kb Manual 60 pages 29.4 Kb Manual 24 pages 21.56 Kb Manual 48 pages 5.05 Kb Manual 40 pages 46.04 Kb