Exmark 850, 00 & Higher manual Shifter Lever Adjustment, Right Side of Unit Shown

Page 32

Maintenance

Figure 22

Right Side of Unit Shown

1.

Wingnut

5.

5/16–18 x 1 3/4 inch hex

 

 

 

capscrew

2.

Transmission Lever in

6.

Drive Lever Linkage

 

neutral

 

 

3.

5/16–18 inch nyloc nut

7.

Swivel

4.

Drive Levers in neutral

8.

Brake Rod

 

 

 

 

Figure 24

1. Shifter Lever

3. Adjustment slot

2.Equal distance

To adjust the shifter lever:

1.Remove the 3/8 inch nyloc nut and spring disc washer from the stud on top of the transmission (See Figure 25).

Shifter Lever Adjustment

The shifter lever in neutral should not contact the upper or lower edge of the slot or the left edge of the upper slot or the right edge of the bottom slot (See Figure 23 and Figure 24). The clearance should be equal. Adjust the shifter lever and shifter plate if necessary.

 

 

Figure 23

1.

Equal distance

3. Shifter Plate

2.

Shifter Lever

 

 

 

 

Figure 25

1. Shifter Lever

3. Transmission

2.Square Holed Washer

2.Remove the shifter lever and bend it slightly. Do Not bend the lever while it is attached to the transmission.

3.Re-install lever and torque the 3/8 inch nyloc nut to 35 ft-lb (47 N-m).

To adjust shifter plate:

Note: The square-hole washer must be between the lever and the transmission.

Place shifter lever in the neutral position. Loosen the two bolts securing the shifter plate to the shifter lever legs. Adjust shifter plate and retighten bolts.

32

Image 32
Contents Metro California Introduction Contents Safety Safety Alert SymbolSafe Operating Practices TrainingSafety Operation Slope OperationMaintenance and Storage Safety and Instructional Decals 403143 98-5954 103-1623 117-2718 103-5626 Systems SpecificationsModel Numbers Dimensions Torque RequirementsProduct Overview OperationControls Operator Presence Control OPC LeversOff-Run Switch Choke ControlThrottle Control Drive LeversPre-Start Operating InstructionsDriving the Machine For ECS HandlesTransporting a Unit TransportingChanging Gears Maintenance Recommended Maintenance SchedulesReplacing the Discharge Deflector Check Engine Oil LevelCheck Mower Blades Check for Loose Hardware Check Safety Interlock SystemService Air Cleaner Change Engine Oil Check Tire PressuresCheck Condition Of Belts Lubricate Grease FittingsCheck Spark Plugs Change Fuel FilterThread Locking Adhesives Mobil HTS Grease Or Food-Grade Anti-seizeCopper-Based Anti-seize Dielectric GreaseAdjustments Adjusting the Cutting HeightAdjusting the Axle Position Adjusting the Number of Spacers below Caster Support Hub Adjusting the Cutting Height with Blade SpacersAdjustment Wheel Drive Belt Pulley ScrapersEngine to Mower Deck Belt Transmission BeltBlade Brake Adjustment Inch Deck Shown for Reference OnlyBelt Guide Adjustment Brake and Wheel Drive Linkage AdjustmentLeft Side Shown Shifter Lever Adjustment Right Side of Unit ShownShifter Detent Adjustment PTO Safety Switch AdjustmentHandle Height Adjustment Wheel Drive Spring Tension AdjustmentClean Engine and Exhaust System Area Remove Engine Shrouds and Clean Cooling FinsClean Debris From Machine Clean Grass Build-Up Under DeckWaste Disposal Motor Oil DisposalTroubleshooting Problem Possible Cause Corrective ActionTroubleshooting Schematics Exmark Commercial Turf Equipment Page Page Service Record Date Description of Work Done Service Done ByThis page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 52 pages 62.21 Kb Manual 32 pages 16.59 Kb Manual 28 pages 32.2 Kb Manual 60 pages 29.4 Kb Manual 24 pages 21.56 Kb Manual 48 pages 5.05 Kb Manual 40 pages 46.04 Kb

00 & Higher, 850 specifications

The Exmark 850 is a top-of-the-line commercial mower, known for its durability, efficiency, and advanced features, making it a favorite among landscaping professionals. With a powerful engine and innovative technology, the Exmark 850 is designed to tackle tough mowing tasks while ensuring a high-quality cut.

One of the standout characteristics of the Exmark 850 is its robust engine performance. Powered by a reliable Kohler or Kawasaki engine, it delivers exceptional horsepower, enabling it to handle various terrains and grass types with ease. The engine is designed for fuel efficiency, allowing operators to work longer hours without frequent refueling, ultimately boosting productivity on the job.

The cutting deck of the Exmark 850 is engineered with precision, utilizing Exmark's proprietary UltraCut technology. This technology ensures that grass is cut evenly and efficiently, resulting in a clean, manicured appearance. The deck height is easily adjustable, allowing users to quickly change settings to accommodate different lawn conditions and preferences.

Another key feature is the innovative suspension system that enhances ride quality. The Exmark 850 is equipped with a heavy-duty front axle and high-performance suspension that absorbs bumps and uneven ground, allowing for a smoother mowing experience. This is especially beneficial for operators who spend long hours on the mower, reducing fatigue and improving comfort.

Ergonomics play a crucial role in the design of the Exmark 850. The operator station is thoughtfully crafted with optimal controls and comfortable seating, allowing for easy maneuverability and long-term use. The ergonomic handles and intuitive control layout make it easy for operators to navigate tricky landscapes, enhancing overall efficiency.

In terms of durability, the Exmark 850 is built to withstand the rigors of commercial use. The high-quality materials and construction ensure that this mower can handle challenging conditions, extending its lifespan and reducing maintenance needs. Additionally, Exmark offers an extensive warranty program, providing peace of mind for operators.

Safety features are also prioritized in the Exmark 850, with guards and shields designed to protect the operator while mowers are in use. These features also include emergency shut-off systems and blade brake systems, ensuring compliance with safety standards.

Overall, the Exmark 850 stands out as a high-performing, reliable, and efficient mower suitable for a variety of commercial landscaping tasks. With its powerful engine, advanced cutting technology, ergonomic design, and emphasis on durability and safety, it continues to be a top choice for professionals seeking high-quality lawn care equipment.