Exmark 00 & Higher, 850 manual Left Side Shown

Page 31

Maintenance

A.For wheel drive linkage adjustment, remove the hairpin between the neutral lock latch and drive lever (Figure 19).

a slight upward force placed on the drive levers to remove any "slack" in the linkage.

C.Re-install hairpin into hole on the clevis pin between the neutral lock/park brake latch and drive lever (See Figure 19).

Repeat procedure on opposite side of unit.

For ECS Handles:

Allow drive levers to drop into the full forward position: the flat edge of the drive lever should align with the bottom roller notch (See Figure 21). Adjust if necessary

Figure 19

Left Side Shown

1.

Drive Lever

4.

Neutral Lock/Park Brake

 

 

 

Latch

2.

Clevis Pin

5.

Hairpin

3.Drive Linkage

B.Adjust drive linkage length by threading into or out of the swivel until there is a 3/16 inch to 1/4 inch (.47-.64 cm) clearance between the linkage assembly and the bottom of the slot in the neutral lock/park brake latch (see Figure 20).

Figure 20

1.3/16 inch to 1/4 inch (.47 cm-.64 cm)

2.Neutral Lock/Park Brake Latch

3.Drive Linkage

Note: Neutral lock/park brake latch clearance should be checked when there is

 

Figure 21

1. Notch in Neutral

2. Drive Lever

Lock/Park Brake Latch

To adjust the wheel drive linkage:

A.Locate a drive lever linkage on one side of the unit and remove the 5/16-18 x 1 3/4 inch hex cap screw and 5/16-18 inch nyloc nut (see Figure 22).

B.Thread drive lever linkage into or out of the swivel located on the wheel drive idler arm until the flat edge of the drive lever aligns with bottom of the roller notch in the neutral lock/park brake latch (see Figure 22).

C.Re-install the 5/16-18 x 1 3/4 inch hex cap screw and secure with the 5/16-18 inch nyloc nut. Repeat for the other side (see Figure 22).

31

Image 31
Contents Metro California Introduction Contents Training SafetySafety Alert Symbol Safe Operating PracticesSafety Slope Operation OperationMaintenance and Storage Safety and Instructional Decals 403143 98-5954 103-1623 117-2718 103-5626 Model Numbers SpecificationsSystems Torque Requirements DimensionsOperator Presence Control OPC Levers Product OverviewOperation ControlsDrive Levers Off-Run SwitchChoke Control Throttle ControlOperating Instructions Pre-StartFor ECS Handles Driving the MachineChanging Gears TransportingTransporting a Unit Recommended Maintenance Schedules MaintenanceCheck Mower Blades Check Engine Oil LevelReplacing the Discharge Deflector Service Air Cleaner Check Safety Interlock SystemCheck for Loose Hardware Lubricate Grease Fittings Change Engine OilCheck Tire Pressures Check Condition Of BeltsChange Fuel Filter Check Spark PlugsDielectric Grease Thread Locking AdhesivesMobil HTS Grease Or Food-Grade Anti-seize Copper-Based Anti-seizeAdjusting the Cutting Height AdjustmentsAdjusting the Axle Position Adjusting the Cutting Height with Blade Spacers Adjusting the Number of Spacers below Caster Support HubTransmission Belt AdjustmentWheel Drive Belt Pulley Scrapers Engine to Mower Deck BeltInch Deck Shown for Reference Only Blade Brake AdjustmentBrake and Wheel Drive Linkage Adjustment Belt Guide AdjustmentLeft Side Shown Right Side of Unit Shown Shifter Lever AdjustmentWheel Drive Spring Tension Adjustment Shifter Detent AdjustmentPTO Safety Switch Adjustment Handle Height AdjustmentRemove Engine Shrouds and Clean Cooling Fins Clean Engine and Exhaust System AreaMotor Oil Disposal Clean Debris From MachineClean Grass Build-Up Under Deck Waste DisposalProblem Possible Cause Corrective Action TroubleshootingTroubleshooting Schematics Exmark Commercial Turf Equipment Page Page Date Description of Work Done Service Done By Service RecordThis page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 52 pages 62.21 Kb Manual 32 pages 16.59 Kb Manual 28 pages 32.2 Kb Manual 60 pages 29.4 Kb Manual 24 pages 21.56 Kb Manual 48 pages 5.05 Kb Manual 40 pages 46.04 Kb

00 & Higher, 850 specifications

The Exmark 850 is a top-of-the-line commercial mower, known for its durability, efficiency, and advanced features, making it a favorite among landscaping professionals. With a powerful engine and innovative technology, the Exmark 850 is designed to tackle tough mowing tasks while ensuring a high-quality cut.

One of the standout characteristics of the Exmark 850 is its robust engine performance. Powered by a reliable Kohler or Kawasaki engine, it delivers exceptional horsepower, enabling it to handle various terrains and grass types with ease. The engine is designed for fuel efficiency, allowing operators to work longer hours without frequent refueling, ultimately boosting productivity on the job.

The cutting deck of the Exmark 850 is engineered with precision, utilizing Exmark's proprietary UltraCut technology. This technology ensures that grass is cut evenly and efficiently, resulting in a clean, manicured appearance. The deck height is easily adjustable, allowing users to quickly change settings to accommodate different lawn conditions and preferences.

Another key feature is the innovative suspension system that enhances ride quality. The Exmark 850 is equipped with a heavy-duty front axle and high-performance suspension that absorbs bumps and uneven ground, allowing for a smoother mowing experience. This is especially beneficial for operators who spend long hours on the mower, reducing fatigue and improving comfort.

Ergonomics play a crucial role in the design of the Exmark 850. The operator station is thoughtfully crafted with optimal controls and comfortable seating, allowing for easy maneuverability and long-term use. The ergonomic handles and intuitive control layout make it easy for operators to navigate tricky landscapes, enhancing overall efficiency.

In terms of durability, the Exmark 850 is built to withstand the rigors of commercial use. The high-quality materials and construction ensure that this mower can handle challenging conditions, extending its lifespan and reducing maintenance needs. Additionally, Exmark offers an extensive warranty program, providing peace of mind for operators.

Safety features are also prioritized in the Exmark 850, with guards and shields designed to protect the operator while mowers are in use. These features also include emergency shut-off systems and blade brake systems, ensuring compliance with safety standards.

Overall, the Exmark 850 stands out as a high-performing, reliable, and efficient mower suitable for a variety of commercial landscaping tasks. With its powerful engine, advanced cutting technology, ergonomic design, and emphasis on durability and safety, it continues to be a top choice for professionals seeking high-quality lawn care equipment.