Exmark FMD604 manual Carbon monoxide can kill you

Page 7

1.3.4Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects which may damage the equipment or cause personal injury to the operator or bystanders.

WARNING

POTENTIAL HAZARD

Engine exhaust contains carbon monoxide, which is an odorless deadly poison.

WHAT CAN HAPPEN

Carbon monoxide can kill you.

HOW TO AVOID THE HAZARD

Do not run engine indoors or in a small confined area where dangerous carbon monoxide fumes can collect.

DANGER

POTENTIAL HAZARD

In certain conditions gasoline is extremely flammable and highly explosive.

WHAT CAN HAPPEN

A fire or explosion from gasoline can burn you, others, and cause property damage.

HOW TO AVOID THE HAZARD

DO NOT smoke while refueling, and stay away from an open flame or where gasoline fumes may be ignited by spark.

Refuel only outdoors.

Store gasoline in an approved container and keep it out of the reach of children.

Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel when engine is running or when the engine is hot.

Never fill the fuel tank so that the gasoline level rises above a level that is 1/2” below the bottom of the filler neck to allow for gasoline expansion and prevent fuel spillage.

If fuel is spilled, DO NOT attempt to start the engine. Move away from the area of the spill and avoid creating any source of ignition until fuel vapors have dissipated.

Do not operate without entire exhaust system in place and in proper working condition.

- 2 -

Image 7
Contents For Turf Tracer Serial Nos ,000 & Higher FMD524 & FMD604 Potential Hazard Exmark Parts Plus Program Operators Manual Table of Contents Training SafetySafety Alert Symbol Your Safety is InvolvedCarbon monoxide can kill you Potential Hazard Operation Potential Hazard Maintenance and Storage Riding Attachments Safety SignsDecals for ECS Handle units only Page Specifications Mower Deck DimensionsWheel Drive System TiresService Battery Assembly InstructionsUncrate Unit Drive Wheels Mower Deck InstallationSupport PIN Location Service Hydraulic OILHEX Stationary Idler Installation Position Discharge ChuteFamiliarize Yourself with the Controls Perform Necessary AdjustmentsOperation Instructions Grease UnitPage Operating Instructions PRE-STARTPotential Hazard Drive LEVER, Neutral Lock Latch Operation Rotating blades under the mower deck are dangerous Transporting Maintenance & AdjustmentsService Interval Daily or more often in dry conditions Periodic MaintenanceBlade Bolt Installation Page Service Interval After First 250 hrs, then yearly thereafter Charge Pump Location Locations Pumps Places Interval Lubrication ChartCaster Wheel Assembly Service Interval Once YearlyPage Adjustments Cutting Height Adjustment Neutral Safety Switch Adjustment Hydro Control LINKAGE/SWIVEL Adjustment Hydro Drive Linkage AdjustmentMake this adjustment for both sides Throttle Tension Hydro Pump Spring Tension SettingWaste Disposal Trouble ShootingEngine Troubleshooting Table Engine TroubleshootingProblem Hydraulic Schematic Wiring Diagrams Limited Warranty Exmark Turf Equipment Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care