Exmark FR27KC, FR20KC, FR23KC manual Safety Signs, Location

Page 15

WARNING

POTENTIAL HAZARD

♦Hydraulic fluid escaping under pressure can penetrate skin and cause injury.

WHAT CAN HAPPEN

♦Fluid accidentally injected into the skin must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result.

HOW TO AVOID THE HAZARD

♦Make sure all hydraulic fluid hoses and lines are in good condition an all hydraulic connections and fittings are tight before applying pressure to hydraulic system.

♦The woven guards that protect the hydraulic hoses may deteriorate and wear over time. Check the guards frequently and replace if necessary.

♦Keep body and hands away from pinhole leaks or nozzles that eject high pressure hydraulic fluid.

♦Use cardboard or paper, not your hands, to find hydraulic leaks.

♦Safely relieve all pressure in the hydraulic system, by placing the motion control levers in neutral and shutting off the engine, before performing any work on the hydraulic system.

1.6SAFETY SIGNS

1.6.1Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels.

1.6.2Safety signs must be replaced if they are missing or illegible.

1.6.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.6.4New safety signs may be obtained from Exmark Mfg. Co. Inc.

1.6.5Safety signs may be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

1.6.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

PART NO. 1-513746

PART NO. 1-513747

LOCATION: Outside of Rear

LOCATION:

LH Side of Battery Holder

Muffler Guard

 

 

10

Page 14 Page 16
Image 15
Page 14 Page 16
Contents For Serial Nos 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolCarbon monoxide can kill you Potential Hazard Potential Hazard Operation Tip-over could cause serious injury or death Potential Hazard Page Maintenance and Storage Location Safety SignsPage Electrical System SpecificationsEngine Fuel SystemHydrostatic Ground Drive System Operator ControlsTires DimensionsOperation Instructions Torque RequirementsControls Potential Hazard Operating Instructions PRE-STARTStarting Engine Transporting Tip-over of the unit could cause serious injury or death Maintenance & Adjustments Periodic MaintenanceService Interval Daily Service Interval Daily or more often in dry conditions Service Interval MonthlyService Interval Daily Check starting circuit Check the kill circuitsCheck the PTO circuit For 20 HP and 23 HP Kohler Units Service Interval 100 hrsPTO must not engage For 27 HP Kohler UnitsService Interval 40 hr Service Interval Refer to chart Service Interval 40 hrsService Interval 160 hrs Service Interval Once YearlyService Interval 80 hrs Service Interval YearlyService Interval After First 250 hrs Then yearly thereafter Service Interval As RequiredService Interval 500 hrs AdjustmentsPage Set neutral Page Weight transfer springs may have stored energy Waste Disposal Trouble ShootingEngine will not Start Engine Troubleshooting TableElectrical Diagram Hydraulic Diagram Year Limited Warranty Exmark Turf Equipment Evaporative Emission Control Warranty Statement Page Page See EXMARK’S Complete Line of Accessories

FR23KC, FR20KC, FR27KC specifications

The Exmark FR27KC, FR23KC, and FR20KC stand out as exemplary models in the commercial-grade zero-turn mower segment, each designed with unique features and advanced technologies for efficiency and durability. These models are powered by Kawasaki engines, renowned for their reliability and performance, ensuring users can tackle tough mowing tasks with ease.

The FR27KC boasts a powerful 27-horsepower engine, making it ideal for larger properties and demanding landscapes. Its robust design and high torque output allow it to handle thicker grasses and challenging terrains effectively. This model features a 60-inch UltraCut deck, which offers superior cutting performance and striping ability. The deck is designed with a unique airflow system that ensures clippings are discharged evenly, promoting a clean and professional look.

In contrast, the FR23KC features a slightly smaller engine with 23 horsepower. This model is perfect for mid-sized lawns and provides a balance of power and maneuverability. It is equipped with a 52-inch deck, allowing for quick and efficient mowing. The FR23KC also comes with Exmark's patented mulching capability, which not only recycles grass clippings but also enhances soil health by returning nutrients to the ground.

The FR20KC is the entry-level model in this range, featuring a 20-horsepower engine. Despite its smaller size, the FR20KC packs a punch with its 48-inch cutting deck, making it suitable for residential properties or smaller commercial tasks. This model emphasizes user comfort with adjustable seating and easy-to-reach controls, making it accessible for users of all skill levels.

All three models share advanced features such as Exmark's patented Hydro-Drive system, which provides smooth and precise control over the mower's speed and direction, enhancing maneuverability. Additionally, they come with heavy-duty components, ensuring longevity and reliability in demanding conditions. Ergonomics has been a significant consideration in these designs, with padded seat options and intuitive control layouts that reduce operator fatigue.

In summary, the Exmark FR27KC, FR23KC, and FR20KC models cater to different mowing needs while incorporating advanced technologies and exceptional build quality. Whether tackling sprawling lawns or managing tight spaces, these mowers deliver performance, comfort, and durability, making them a worthwhile investment for any serious landscaper or homeowner.
Top Page Image Contents