Exmark FR20KC, FR27KC, FR23KC manual Waste Disposal, Trouble Shooting

Page 40

5. WASTE DISPOSAL

5.1 MOTOR OIL DISPOSAL

Engine oil and hydraulic oil are both pollutants to the environment. Dispose of used oil at a certified recycling center or according to your state and local regulations.

5.2 BATTERY DISPOSAL

DANGER

POTENTIAL HAZARD

♦Battery electrolyte contains sulfuric acid, which is poisonous and can cause severe burns

WHAT CAN HAPPEN

♦Swallowing electrolyte can be fatal or if it touches skin can cause severe burns.

HOW TO AVOID THE HAZARD

♦Wear safety glasses to shield eyes, and rubber gloves to protect skin and clothing when handling electrolyte.

♦Do not swallow electrolyte.

Federal law states that batteries should not be placed in the garbage. Management and disposal practices must be within relevant federal, state, or local laws.

If a battery is being replaced or if the unit containing the battery is no longer operating and is being scrapped, take the battery to a local certified recycling center. If no local recycling is available return the battery to any certified battery reseller.

6.TROUBLE SHOOTING

6.1MOWER PULLS LEFT OR RIGHT (WITH LEVERS FULLY FORWARD).

a)Refer to Tracking Adjustment Section 4.2.5

b)Check air pressure in drive tires.

For 20 and 23 HP Kohler Units: The drive tires should be inflated to 13 psi (90 kpa).

For 27 HP Koher Units: The drive tires should be inflated to 9 psi (62 kpa)

For All Units: Semi-pneumatic casters do not require inflation.

6.2MOWER CUTS UNEVENLY.

a)Check air pressure in drive tires.

For 20 and 23 HP Kohler Units: The drive tires should be inflated to 13 psi (90 kpa).

For 27 HP Koher Units: The drive tires should be inflated to 9 psi (62 kpa)

For All Units: Semi-pneumatic casters do not require inflation.

A more uniform cutting height may be obtained with higher tire pressure on rough terrain. A lower tire pressure provides more flotation.

b)Check deck leveling (See Adjustments in Deck Manual).

Note: The front of the mower deck will be approximately 1/4” lower than the back of the mower deck. This is the “rake” of the deck.

c)Check the distance from the bottom edge of the deck skirt to the tip of each blade. Measurement should be consistent between all blade tips.

35

Page 39 Page 41
Image 40
Page 39 Page 41
Contents For Serial Nos 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Your Safety is InvolvedSafety Alert Symbol TrainingCarbon monoxide can kill you Potential Hazard Potential Hazard Operation Tip-over could cause serious injury or death Potential Hazard Page Maintenance and Storage Safety Signs LocationPage Specifications EngineFuel System Electrical SystemOperator Controls Hydrostatic Ground Drive SystemDimensions TiresTorque Requirements Operation InstructionsControls Potential Hazard PRE-START Operating InstructionsStarting Engine Transporting Tip-over of the unit could cause serious injury or death Periodic Maintenance Maintenance & AdjustmentsService Interval Daily Service Interval Monthly Service Interval Daily or more often in dry conditionsCheck the kill circuits Service Interval Daily Check starting circuitCheck the PTO circuit Service Interval 100 hrs PTO must not engageFor 27 HP Kohler Units For 20 HP and 23 HP Kohler UnitsService Interval 40 hr Service Interval 40 hrs Service Interval Refer to chartService Interval Once Yearly Service Interval 160 hrsService Interval Yearly Service Interval 80 hrsService Interval As Required Service Interval After First 250 hrs Then yearly thereafterAdjustments Service Interval 500 hrsPage Set neutral Page Weight transfer springs may have stored energy Trouble Shooting Waste DisposalEngine Troubleshooting Table Engine will not StartElectrical Diagram Hydraulic Diagram Year Limited Warranty Exmark Turf Equipment Evaporative Emission Control Warranty Statement Page Page See EXMARK’S Complete Line of Accessories

FR23KC, FR20KC, FR27KC specifications

The Exmark FR27KC, FR23KC, and FR20KC stand out as exemplary models in the commercial-grade zero-turn mower segment, each designed with unique features and advanced technologies for efficiency and durability. These models are powered by Kawasaki engines, renowned for their reliability and performance, ensuring users can tackle tough mowing tasks with ease.

The FR27KC boasts a powerful 27-horsepower engine, making it ideal for larger properties and demanding landscapes. Its robust design and high torque output allow it to handle thicker grasses and challenging terrains effectively. This model features a 60-inch UltraCut deck, which offers superior cutting performance and striping ability. The deck is designed with a unique airflow system that ensures clippings are discharged evenly, promoting a clean and professional look.

In contrast, the FR23KC features a slightly smaller engine with 23 horsepower. This model is perfect for mid-sized lawns and provides a balance of power and maneuverability. It is equipped with a 52-inch deck, allowing for quick and efficient mowing. The FR23KC also comes with Exmark's patented mulching capability, which not only recycles grass clippings but also enhances soil health by returning nutrients to the ground.

The FR20KC is the entry-level model in this range, featuring a 20-horsepower engine. Despite its smaller size, the FR20KC packs a punch with its 48-inch cutting deck, making it suitable for residential properties or smaller commercial tasks. This model emphasizes user comfort with adjustable seating and easy-to-reach controls, making it accessible for users of all skill levels.

All three models share advanced features such as Exmark's patented Hydro-Drive system, which provides smooth and precise control over the mower's speed and direction, enhancing maneuverability. Additionally, they come with heavy-duty components, ensuring longevity and reliability in demanding conditions. Ergonomics has been a significant consideration in these designs, with padded seat options and intuitive control layouts that reduce operator fatigue.

In summary, the Exmark FR27KC, FR23KC, and FR20KC models cater to different mowing needs while incorporating advanced technologies and exceptional build quality. Whether tackling sprawling lawns or managing tight spaces, these mowers deliver performance, comfort, and durability, making them a worthwhile investment for any serious landscaper or homeowner.
Top Page Image Contents