Exmark FR23KC, FR27KC Maintenance & Adjustments, Periodic Maintenance, Service Interval Daily

Page 26

4. MAINTENANCE & ADJUSTMENTS

WARNING

POTENTIAL HAZARD

♦While maintenance or adjustments are being made, someone could start the engine.

WHAT CAN HAPPEN

♦Accidental starting of the engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

♦Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

POTENTIAL HAZARD

♦The engine can become very hot.

WHAT CAN HAPPEN

♦Touching a hot engine can cause severe burns.

HOW TO AVOID THE HAZARD

♦Allow the engine to cool completely before service or making repairs around the engine area.

4.1PERIODIC MAINTENANCE

4.1.1Check engine oil level:

Service Interval: Daily

a)Stop engine and wait for all moving parts to stop. Make sure unit is on a level surface.

b)Tilt seat forward and raise hood to gain access to access to engine area.

c)Check with engine cold.

d)Clean area around dipstick. Remove dipstick and wipe oil off. Reinsert the dipstick and push it all the way down into the tube. Remove the dipstick and read the oil level.

e)If the oil level is low, wipe off the area around the oil fill cap, remove cap and fill to the “FULL” mark on the dipstick. Use oil as specified in Engine Owner’s Manual. DO NOT overfill.

IMPORTANT: DO NOT operate the engine with the oil level below the “LOW” (or “ADD”) mark on the dipstick, or over the “FULL” mark.

21

Page 25 Page 27
Image 26
Page 25 Page 27
Contents For Serial Nos 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Potential Hazard Operation Tip-over could cause serious injury or death Potential Hazard Page Maintenance and Storage Safety Signs LocationPage Fuel System SpecificationsEngine Electrical SystemOperator Controls Hydrostatic Ground Drive SystemDimensions TiresControls Operation InstructionsTorque Requirements Potential Hazard PRE-START Operating InstructionsStarting Engine Transporting Tip-over of the unit could cause serious injury or death Service Interval Daily Maintenance & AdjustmentsPeriodic Maintenance Service Interval Monthly Service Interval Daily or more often in dry conditionsCheck the PTO circuit Service Interval Daily Check starting circuitCheck the kill circuits For 27 HP Kohler Units Service Interval 100 hrsPTO must not engage For 20 HP and 23 HP Kohler UnitsService Interval 40 hr Service Interval 40 hrs Service Interval Refer to chartService Interval Once Yearly Service Interval 160 hrsService Interval Yearly Service Interval 80 hrsService Interval As Required Service Interval After First 250 hrs Then yearly thereafterAdjustments Service Interval 500 hrsPage Set neutral Page Weight transfer springs may have stored energy Trouble Shooting Waste DisposalEngine Troubleshooting Table Engine will not StartElectrical Diagram Hydraulic Diagram Year Limited Warranty Exmark Turf Equipment Evaporative Emission Control Warranty Statement Page Page See EXMARK’S Complete Line of Accessories

FR23KC, FR20KC, FR27KC specifications

The Exmark FR27KC, FR23KC, and FR20KC stand out as exemplary models in the commercial-grade zero-turn mower segment, each designed with unique features and advanced technologies for efficiency and durability. These models are powered by Kawasaki engines, renowned for their reliability and performance, ensuring users can tackle tough mowing tasks with ease.

The FR27KC boasts a powerful 27-horsepower engine, making it ideal for larger properties and demanding landscapes. Its robust design and high torque output allow it to handle thicker grasses and challenging terrains effectively. This model features a 60-inch UltraCut deck, which offers superior cutting performance and striping ability. The deck is designed with a unique airflow system that ensures clippings are discharged evenly, promoting a clean and professional look.

In contrast, the FR23KC features a slightly smaller engine with 23 horsepower. This model is perfect for mid-sized lawns and provides a balance of power and maneuverability. It is equipped with a 52-inch deck, allowing for quick and efficient mowing. The FR23KC also comes with Exmark's patented mulching capability, which not only recycles grass clippings but also enhances soil health by returning nutrients to the ground.

The FR20KC is the entry-level model in this range, featuring a 20-horsepower engine. Despite its smaller size, the FR20KC packs a punch with its 48-inch cutting deck, making it suitable for residential properties or smaller commercial tasks. This model emphasizes user comfort with adjustable seating and easy-to-reach controls, making it accessible for users of all skill levels.

All three models share advanced features such as Exmark's patented Hydro-Drive system, which provides smooth and precise control over the mower's speed and direction, enhancing maneuverability. Additionally, they come with heavy-duty components, ensuring longevity and reliability in demanding conditions. Ergonomics has been a significant consideration in these designs, with padded seat options and intuitive control layouts that reduce operator fatigue.

In summary, the Exmark FR27KC, FR23KC, and FR20KC models cater to different mowing needs while incorporating advanced technologies and exceptional build quality. Whether tackling sprawling lawns or managing tight spaces, these mowers deliver performance, comfort, and durability, making them a worthwhile investment for any serious landscaper or homeowner.
Top Page Image Contents