Exmark FR27KC, FR20KC, FR23KC manual Potential Hazard

Page 21

To make a zero turn to the left, pull the left lever back beyond neutral while holding the right lever slightly ahead of neutral.

To make a zero turn to the right, pull the right lever back beyond neutral while holding the left lever slightly ahead of neutral.

Pulling the levers back from the neutral position will cause the respective drive wheels to rotate in a reverse direction (spring tension can be felt when moving into reverse from neutral).

To turn to the left while backing, move the left lever forward toward neutral. To turn to the right while backing, move the right lever forward toward neutral.

CAUTION

POTENTIAL HAZARD

♦Machine can spin very rapidly by positioning one lever too much ahead of the other.

WHAT CAN HAPPEN

♦Operator may lose control of the machine, which may cause damage to the machine or injury.

HOW TO AVOID THE HAZARD

♦Use caution when making turns.

♦Slow the machine down before making sharp turns.

3.1.3PTO Engagement Switch: Located on the right fuel tank console.

Switch must be pulled out to the “ROTATE” position to engage the PTO. The Switch is pushed in to the “STOP” position to stop the PTO.

3.1.4Choke Control: Located on right fuel tank console.

Choke is used to aid in starting a cold engine. Moving the choke lever forward will put the choke in the “ON” position and moving the choke lever to the rear will put the choke in the “OFF” position. DO NOT run a warm engine with choke in the “ON” position.

3.1.5Throttle Control: Located on right fuel tank console.

Throttle is used to control engine speed. Moving throttle lever forward will increase engine speed and moving throttle lever to the rear will decrease engine speed.

3.1.6Brake Lever: Located on left side of unit, between the seat and the dummy tank. The brake lever engages a parking brake on the drive wheels.

Pull the lever up to engage the brake.

Push the lever down to disengage the brake.

The unit must be tied down and brake engaged when transporting.

3.1.7Ignition Switch: Located on the right fuel tank console.

The ignition switch is used to start and stop the engine. The switch has three positions “OFF”, “ON” and “START”. Insert key into switch and rotate clockwise to the “ON” position. Rotate clockwise to the next position to engage the starter (key must be held against spring pressure in this position).

Brake must be engaged, speed control lever in neutral and PTO switch “OFF” to start engine. (It is not necessary for the operator to be in the seat to start the engine.)

16

Page 20 Page 22
Image 21
Page 20 Page 22
Contents For Serial Nos 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Your Safety is Involved SafetySafety Alert Symbol TrainingCarbon monoxide can kill you Potential Hazard Potential Hazard Operation Tip-over could cause serious injury or death Potential Hazard Page Maintenance and Storage Location Safety SignsPage Engine SpecificationsFuel System Electrical SystemHydrostatic Ground Drive System Operator ControlsTires DimensionsOperation Instructions Torque RequirementsControls Potential Hazard Operating Instructions PRE-STARTStarting Engine Transporting Tip-over of the unit could cause serious injury or death Maintenance & Adjustments Periodic MaintenanceService Interval Daily Service Interval Daily or more often in dry conditions Service Interval MonthlyService Interval Daily Check starting circuit Check the kill circuitsCheck the PTO circuit PTO must not engage Service Interval 100 hrsFor 27 HP Kohler Units For 20 HP and 23 HP Kohler UnitsService Interval 40 hr Service Interval Refer to chart Service Interval 40 hrsService Interval 160 hrs Service Interval Once YearlyService Interval 80 hrs Service Interval YearlyService Interval After First 250 hrs Then yearly thereafter Service Interval As RequiredService Interval 500 hrs AdjustmentsPage Set neutral Page Weight transfer springs may have stored energy Waste Disposal Trouble ShootingEngine will not Start Engine Troubleshooting TableElectrical Diagram Hydraulic Diagram Year Limited Warranty Exmark Turf Equipment Evaporative Emission Control Warranty Statement Page Page See EXMARK’S Complete Line of Accessories

FR23KC, FR20KC, FR27KC specifications

The Exmark FR27KC, FR23KC, and FR20KC stand out as exemplary models in the commercial-grade zero-turn mower segment, each designed with unique features and advanced technologies for efficiency and durability. These models are powered by Kawasaki engines, renowned for their reliability and performance, ensuring users can tackle tough mowing tasks with ease.

The FR27KC boasts a powerful 27-horsepower engine, making it ideal for larger properties and demanding landscapes. Its robust design and high torque output allow it to handle thicker grasses and challenging terrains effectively. This model features a 60-inch UltraCut deck, which offers superior cutting performance and striping ability. The deck is designed with a unique airflow system that ensures clippings are discharged evenly, promoting a clean and professional look.

In contrast, the FR23KC features a slightly smaller engine with 23 horsepower. This model is perfect for mid-sized lawns and provides a balance of power and maneuverability. It is equipped with a 52-inch deck, allowing for quick and efficient mowing. The FR23KC also comes with Exmark's patented mulching capability, which not only recycles grass clippings but also enhances soil health by returning nutrients to the ground.

The FR20KC is the entry-level model in this range, featuring a 20-horsepower engine. Despite its smaller size, the FR20KC packs a punch with its 48-inch cutting deck, making it suitable for residential properties or smaller commercial tasks. This model emphasizes user comfort with adjustable seating and easy-to-reach controls, making it accessible for users of all skill levels.

All three models share advanced features such as Exmark's patented Hydro-Drive system, which provides smooth and precise control over the mower's speed and direction, enhancing maneuverability. Additionally, they come with heavy-duty components, ensuring longevity and reliability in demanding conditions. Ergonomics has been a significant consideration in these designs, with padded seat options and intuitive control layouts that reduce operator fatigue.

In summary, the Exmark FR27KC, FR23KC, and FR20KC models cater to different mowing needs while incorporating advanced technologies and exceptional build quality. Whether tackling sprawling lawns or managing tight spaces, these mowers deliver performance, comfort, and durability, making them a worthwhile investment for any serious landscaper or homeowner.
Top Page Image Contents