Exmark FR20KC, FR27KC, FR23KC manual Operation

Page 10

WARNING

POTENTIAL HAZARD

♦Gasoline vapor can collect inside enclosed trailers and may be ignited by electrical sparks or hot engine/exhaust components.

WHAT CAN HAPPEN

♦Explosion and fire may occur, resulting in property damage, personal injury, and/or death.

HOW TO AVOID THE HAZARD

♦Provide adequate ventilation of any enclosed trailer to prevent build up of gasoline vapors, especially at floor level.

♦Refuel only outdoors, never inside an enclosed trailer.

♦Be sure all fuel tanks and gasoline storage containers have proper caps installed to prevent spillage and minimize vapor escaping into the trailer.

♦Do not place any equipment that is leaking gasoline in an enclosed trailer.

1.4 OPERATION

Although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. It is essential that all Operator Safety Mechanisms be connected and in operating condition prior to use for mowing.

WARNING

POTENTIAL HAZARD

♦Operating engine parts, especially the muffler, become extremely hot.

WHAT CAN HAPPEN

♦Severe burns can occur on contact.

♦Debris, such as leaves, grass, brush, etc. can catch fire.

HOW TO AVOID THE HAZARD

♦Allow engine parts, especially the muffler, to cool before touching.

♦Remove accumulated debris from muffler and engine area.

♦Install and maintain in working order a spark arrester before using equipment on forest-covered, grass-covered, or brush- covered unimproved land.

5

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For Serial Nos 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Potential Hazard Operation Tip-over could cause serious injury or death Potential Hazard Page Maintenance and Storage Safety Signs LocationPage Fuel System SpecificationsEngine Electrical SystemOperator Controls Hydrostatic Ground Drive SystemDimensions TiresTorque Requirements Operation InstructionsControls Potential Hazard PRE-START Operating InstructionsStarting Engine Transporting Tip-over of the unit could cause serious injury or death Periodic Maintenance Maintenance & AdjustmentsService Interval Daily Service Interval Monthly Service Interval Daily or more often in dry conditionsCheck the kill circuits Service Interval Daily Check starting circuitCheck the PTO circuit For 27 HP Kohler Units Service Interval 100 hrsPTO must not engage For 20 HP and 23 HP Kohler UnitsService Interval 40 hr Service Interval 40 hrs Service Interval Refer to chartService Interval Once Yearly Service Interval 160 hrsService Interval Yearly Service Interval 80 hrsService Interval As Required Service Interval After First 250 hrs Then yearly thereafterAdjustments Service Interval 500 hrsPage Set neutral Page Weight transfer springs may have stored energy Trouble Shooting Waste DisposalEngine Troubleshooting Table Engine will not StartElectrical Diagram Hydraulic Diagram Year Limited Warranty Exmark Turf Equipment Evaporative Emission Control Warranty Statement Page Page See EXMARK’S Complete Line of Accessories

FR23KC, FR20KC, FR27KC specifications

The Exmark FR27KC, FR23KC, and FR20KC stand out as exemplary models in the commercial-grade zero-turn mower segment, each designed with unique features and advanced technologies for efficiency and durability. These models are powered by Kawasaki engines, renowned for their reliability and performance, ensuring users can tackle tough mowing tasks with ease.

The FR27KC boasts a powerful 27-horsepower engine, making it ideal for larger properties and demanding landscapes. Its robust design and high torque output allow it to handle thicker grasses and challenging terrains effectively. This model features a 60-inch UltraCut deck, which offers superior cutting performance and striping ability. The deck is designed with a unique airflow system that ensures clippings are discharged evenly, promoting a clean and professional look.

In contrast, the FR23KC features a slightly smaller engine with 23 horsepower. This model is perfect for mid-sized lawns and provides a balance of power and maneuverability. It is equipped with a 52-inch deck, allowing for quick and efficient mowing. The FR23KC also comes with Exmark's patented mulching capability, which not only recycles grass clippings but also enhances soil health by returning nutrients to the ground.

The FR20KC is the entry-level model in this range, featuring a 20-horsepower engine. Despite its smaller size, the FR20KC packs a punch with its 48-inch cutting deck, making it suitable for residential properties or smaller commercial tasks. This model emphasizes user comfort with adjustable seating and easy-to-reach controls, making it accessible for users of all skill levels.

All three models share advanced features such as Exmark's patented Hydro-Drive system, which provides smooth and precise control over the mower's speed and direction, enhancing maneuverability. Additionally, they come with heavy-duty components, ensuring longevity and reliability in demanding conditions. Ergonomics has been a significant consideration in these designs, with padded seat options and intuitive control layouts that reduce operator fatigue.

In summary, the Exmark FR27KC, FR23KC, and FR20KC models cater to different mowing needs while incorporating advanced technologies and exceptional build quality. Whether tackling sprawling lawns or managing tight spaces, these mowers deliver performance, comfort, and durability, making them a worthwhile investment for any serious landscaper or homeowner.
Top Page Image Contents