Safety

spark plug wire. Wait for all movement to stop before adjusting, cleaning or repairing.

•Keep engine and engine area free from accumulation of grass, leaves, excessive grease or oil, and other debris which can accumulate in these areas. These materials can become combustible and may result in a fire.

•Let engine cool before storing and Do Not store near flame or any enclosed area where open pilot lights or heat appliances are present.

•Shut off fuel while storing or transporting. Do Not store fuel near flames or drain indoors.

•Park machine on level ground. Never allow untrained personnel to service machine.

•Use jack stands to support components when required.

•Carefully release pressure from components with stored energy.

•Disconnect battery or remove spark plug wire before making any repairs. Disconnect the negative terminal first and the positive last. Reconnect positive first and negative last.

•Use care when checking blades. Wrap the blade(s) or wear gloves, and use caution when servicing them. Only replace damaged blades. Never straighten or weld them.

•Keep hands and feet away from moving parts. If possible, Do Not make adjustments with the engine running.

•Charge batteries in an open well ventilated area, away from spark and flames. Unplug charger before connecting or disconnecting from battery. Wear protective clothing and use insulated tools.

DANGER

Charging or jump starting the battery may produce explosive gases. Battery gases can explode causing serious injury.

•Keep sparks, flames, or cigarettes away from battery.

•Ventilate when charging or using battery in an enclosed space.

•Make sure venting path of battery is always open once battery is filled with acid.

•Always shield eyes and face from battery.

DANGER

Battery electrolyte contains sulfuric acid, which is poisonous and can cause severe burns. Swallowing electrolyte can be fatal or if it touches skin can cause severe burns.

•Wear safety glasses to shield eyes, and rubber gloves to protect skin and clothing when handling electrolyte.

•Do Not swallow electrolyte.

•In the event of an accident, flush with water and call a doctor immediately.

CAUTION

If the ignition is in the “ON” position there is potential for sparks and engagement

of components. Sparks could cause an explosion or moving parts could accidentally engage causing personal injury.

Be sure ignition switch is in the “OFF” position before charging the battery.

•Keep all guards, shields and all safety devices in place and in safe working condition.

•Check all bolts frequently to maintain proper tightness.

•Frequently check for worn or deteriorating components that could create a hazard.

WARNING

Removing standard original equipment parts and accessories may alter the warranty, traction, and safety of the machine. Failure to use original Exmark parts could cause serious injury or death. Making unauthorized changes to the engine, fuel or venting system, may violate EPA and CARB regulations.

Replace all parts including, but not limited to, tires, belts, blades, and fuel system components with original Exmark parts.