General setup

PANORAMA CONTROL

If set to ON the Panorama Control extends the audio signal from the front loudspeakers to include the surround loudspeakers. This adds a "wraparound" effect to the sound.

Options: ON, OFF

Default setting: OFF

DIMENSION CONTROL

This parameter allows you to shift the balance between the front and rear loudspeakers. Positive values move the sound towards the front, negative values towards the rear. If a recording is too spacious or strong from the surround loudspeakers it can be shifted "forward" to get a better balance. Likewise, a recording that is too strong from the front loudspeakers can be shifted "backward" to make the sound more enveloping.

Range: -3(most rear) to 3 (most front)

Default setting: 0 (neutral)

Select SAVE to save your changes and return to the AUDIO OPTIONS menu.

Select BACK to return to the AUDIO OPTIONS menu without saving changes.

Select EXIT to leave setup (if changes have been made and SAVE has not been selected, you will be prompted to save or not save the changes).

Select SAVE to save your changes and return to the MAIN MENU.

Select BACK to return to the MAIN MENU without saving changes.

Select EXIT to leave setup (if changes have been made and SAVE has not been selected, you will be prompted to save or not save the changes).

DISPLAY INTENSITY

Set the brightness of the front panel display.

Options: LOW, MEDIUM, HIGH

Default setting: MEDIUM

DISPLAY CONTENT

Set what information you want displayed on the AKURATE KONTROL’s front panel when it is in normal operation.

Options: LAST USED*, SOURCE AND VOLUME, VOLUME, SOURCE

Default setting: SOURCE AND VOLUME

*If you change source, the new source will remain displayed on the front panel. If you change volume, the volume level will remain displayed.

DISPLAY TIMEOUT

Set the time that new volume or source information is displayed on the front panel before the AKURATE KONTROL shows its Display Content (see above).

Options: 1 SEC. to 10 SEC.

Default setting: 2 SEC.

SLEEP TIMEOUT

Set the elapsed time before the front panel display enters sleep mode (i.e. shows three dots) after a key on the front panel or handset is pressed.

Options: NEVER SLEEP, IMMEDIATE, 30 SEC., 5 MINS.

Default setting: NEVER SLEEP

ENGLISH

AKURATE KONTROL 11