ENGLISH
Notes on the list of sources:
NO SOURCE: No record path will be set.
KNEKT: When a record path on the AKURATE KONTROL is being used, this setting will allow users of a KNEKT Line Driver system to change the source they are listening to (which also changes the record path). To protect a record path, select the required record option. Once recording has finished, reselect the KNEKT option.
The available record modes are:
Option | Information | |
|
| |
LtRt 44.1 kHz | Choose the option that suits your recording device’s | |
LtRt 48 kHz | operating frequency. (With these options, | |
signals are downmixed to two channels) | ||
LtRt 88.2 kHz | ||
| ||
LtRt 96 kHz |
| |
LtRt As Input | Output frequency is the same as the input frequency, | |
| and | |
| channels | |
Bit Perfect | Output frequency is the same as the input frequency | |
| and there is no processing of the signal | |
|
| |
Analog | Passes audio signals to the analogue outputs | |
|
|
Notes:
The audio signal from the selected source is routed to either all of the analogue and/or all of the digital outputs simultaneously. It is not necessary to specify which output your recording device is connected to.
The available record modes are dependent on whether the input signal is analogue or digital.
For reasons of copyright protection some audio and video discs incorporate systems that prevent them from being recorded.