2.SPECIFICATIONS
2.1MODEL NUMBER:
TT23KCC; TT23KAC; TT20KCC
2.2ENGINE
2.2.1Engine Specifications: See your Engine Owner's Manual.
2.2.23600 RPM (No Load).
2.3FUEL SYSTEM
2.3.1Capacity: 5.0 gal. (18.9 L.)
2.3.2Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.
2.3.3Fuel Filter: Replaceable
2.3.4Fuel
2.4ELECTRICAL SYSTEM:
2.4.1Charging System: Flywheel Alternator
2.4.2Charging Capacity: 15 amp
2.4.3Battery Type: BCI Group U1 235 amps at O° F
2.4.4Battery Voltage: 12 Volt; Polarity, negative ground.
2.4.5Fuses: blade type, 20 amp to charging circuit; 20 amp to electric clutch.
2.4.6Safety Interlock System: Operator must have OPC (Operator Presence Control) levers held in contact with handle grips, speed control lever in neutral, and PTO disengaged to start engine. Release of OPC levers will cause the engine to stop if speed control lever is not in neutral and/or PTO is engaged.
Park brake must be disengaged to move speed control out of neutral or engine will kill.
2.5STEERING CONTROL:
Fingertip drive control levers provide independent speed control, braking and neutral to each drive wheel for moving forward or reverse, stopping, and power turning.
2.6TRANSMISSION:
2.6.1Two Hydro Gear
2.6.2Hydraulic Oil: Use Mobil 1
2.6.3Hydraulic Oil Capacity: 2.4 qt. (2.2 L.)
2.6.3Hydraulic Filter is replaceable cartridge type.
P/N
P/N
2.6.4 | Speed Range: | Forward | 0 - 6.75 mph (10.9 km/h) |
|
| Reverse | 0 - 2.25 mph (3.6 km/h) |
2.6.5Drive wheel release valves allow machine to be moved when the engine is not running
2.7WHEEL DRIVE SYSTEM:
Drive wheels are direct coupled to Parker wheel drive motors with 1.0" (25.4 mm) tapered shaft.
- 10 -