Exmark FMD524 manual Maintenance & Adjustments, Transporting

Page 25

4.4 TRANSPORTING

WARNING

POTENTIAL HAZARD

Loading the mower onto a trailer without strong enough or properly supported ramps could be dangerous.

WHAT CAN HAPPEN

The ramps could collapse causing the unit to fall, which could cause injury.

HOW TO AVOID THE HAZARD

Use proper ramps that are secured to the truck or trailer.

Keep feet and legs out from under the unit when loading and unloading.

If necessary, use assistance when loading.

Be sure the fuel shut-off valve is closed.

Use a heavy duty trailer to transport the machine. Engage neutral lock latches and park brake, then block wheels.

Securely fasten the machine to the trailer with straps, chains, cables, or ropes. Do not rely solely on the parking brake to hold the machine on the trailer.

Be sure that the trailer has all necessary lighting and marking as required by law and use a safety chain.

5. MAINTENANCE & ADJUSTMENTS

WARNING

POTENTIAL HAZARD

While maintenance or adjustments are being made, someone could start the engine.

WHAT CAN HAPPEN

Accidental starting of the engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

Remove the key from the ignition switch and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

POTENTIAL HAZARD

The engine can become very hot.

WHAT CAN HAPPEN

Touching a hot engine can cause severe burns.

HOW TO AVOID THE HAZARD

Allow the engine to cool completely before service or making repairs around the engine area.

- 20 -

Image 25
Contents For Turf Tracer Serial Nos ,000 & Higher FMD524 & FMD604 Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Operation Potential Hazard Maintenance and Storage Riding Attachments Safety SignsPage Location Front RH Side of Mower Deck Specifications Tires DimensionsMower Deck Torque RequirementsService Battery Assembly InstructionsUncrate Unit Drive Wheels Mower Deck InstallationStationary Idler Installation Service Hydraulic OILPosition Discharge Chute Support PIN LocationOperation Instructions Perform Necessary AdjustmentsGrease Unit Familiarize Yourself with the ControlsDrive LEVER, Neutral Lock Latch Operation Operating Instructions PRE-STARTPotential Hazard Rotating blades under the mower deck are dangerous Transporting Maintenance & AdjustmentsService Interval Daily or more often in dry conditions Periodic MaintenanceFor Serial Nos ,000 539,999 Blade Bolt InstallationBlade Bolt Installation Page Service Interval After First 250 hrs, then yearly thereafter Charge Pump Location Locations Pumps Places Interval Lubrication ChartCaster Wheel Assembly Service Interval Once YearlyPage Cutting Height Adjustment AdjustmentsANTI-SCALP Roller Installation Cutting Height Adjustment Hydro Drive Linkage Adjustment Neutral Safety Switch AdjustmentHydro Control LINKAGE/SWIVEL Adjustment Drive Lever and Latch in Neutral Position Hydro Pump Spring Tension SettingBattery Disposal Trouble ShootingWaste Disposal Motor OIL DisposalMower Cuts Unevenly Engine TroubleshootingEngine will not Start Problem Engine Troubleshooting TableHydraulic Schematic Wiring Diagram Year Limited Warranty Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Accessories