Exmark 920 manual Dimensions, Overall Width, Overall Length, Overall Height

Page 18

Specifications

48 inch Deck: (121.9 cm)

52 inch Deck: (132.1 cm)

60 inch Deck: (152.4 cm)

72 inch Deck: (182.9 cm)

Discharge: Side

Blade Size: (3 ea.)

48 inch Deck: 16.25 inches (41.3 cm)

52 inch Deck: 18.00 inches (45.7 cm)

60 inch Deck: 20.50 inches (52.1 cm)

72 inch Deck: 24.50 inches (62.2 cm)

Blade Spindles: Solid steel spindles with 1.00 inch (25 mm) I.D. bearings.

Deck Drive: Electric clutch:

48 and 52 inch Decks: “B” Section belt with self-tensioning idler.

60 and 72 inch Decks: 5V Section belt with self-tensioning idler.

Deck:

Full floating deck is attached to out-front support frame. Anti-scalp rollers provide maximum turf protection. Deck design allows for bagging, mulching or side discharge.

48 inch Deck: 3 anti-scalp rollers

52 inch Deck: 3 anti-scalp rollers

60 inch Deck: 4 anti-scalp rollers

72 inch Deck: 4 anti-scalp rollers

Deck Depth:

48 inch Deck: 5.5 inches (14 cm)

52 inch Deck: 5.5 inches (14 cm)

60 inch Deck: 5.5 inches (14 cm)

72 inch Deck: 5.5 inches (14 cm)

Cutting Height Adjustment:

Foot activated lever is used to adjust the cutting height from 1 inch (2.5 cm) to 5 1/2 inches (14 cm) in 1/4 inch (6.4 mm) increments.

Mulching Kit: Optional.

Dimensions

Overall Width:

 

48 inch Deck

52 inch Deck

Without Deck

45.7

inches

45.7

inches

 

(116.1 cm)

(116.1 cm)

Deflector Up

51.8

inches

56.3

inches

 

(131.6 cm)

(143.0 cm)

Deflector Down

59.6

inches

64.8

inches

 

(151.4 cm)

(164.6 cm)

 

60 inch Deck

72 inch Deck

Without Deck

53.0

inches

59.1

inches

 

(134.6 cm)

(150.1 cm)

Deflector Up

62.5

inches

73.5

inches

 

(158.8 cm)

(186.7 cm)

Deflector Down

72.8

inches

84.9

inches

 

(184.9 cm)

(215.6 cm)

Overall Length:

 

48 inch Deck

52 inch Deck

Roll Bar - Up

79.2

inches

79.2

inches

 

(201.2 cm)

(201.2 cm)

Roll Bar - Down

80.9

inches

80.9

inches

 

(205.5 cm)

(205.5 cm)

 

60 inch Deck

72 inch Deck

Roll Bar - Up

83.1

inches

86.1

inches

 

(211.1 cm)

(218.7 cm)

Roll Bar - Down

84.8

inches

87.8

inches

 

(215.4 cm)

(223.0 cm)

Overall Height:

Roll Bar - Up

Roll Bar - Down

70.5 inches (179.1 cm)

46.8 inches (118.9 cm)

18

Image 18
Contents Lazer Z S-SERIES California Introduction Contents Safe Operating Practices SafetySafety Alert Symbol TrainingSafety Operation Using the Rollover Protection System Rops Slope OperationMaintenance and Storage For Kohler EFI Electronic Fuel Injection Units Safety and Instructional Decals 109-7232 109-8483 116-0752 PTO Switch Symbols Specifications Model NumbersSystems Tires & Wheels SeatHydrostatic Ground Drive System Cutting DeckOverall Length DimensionsOverall Width Overall HeightCurb Weight Tread Width Center to Center of Tires, WidthwiseWheel Base Center of Caster Tire to Center of Drive Tire Accessory Weight Table Worksheet Torque RequirementsControls Product OverviewOperation Motion Control LeversThrottle Control Ignition SwitchChoke Control All Units Except Kohler EFI Brake LeverFuel Shut-Off Valve Fuel GaugeDrive Wheel Release Valves Pre-Start Open the Fuel Shut-Off Valve Operating InstructionsRaise the Rollover Protection System Rops Starting the EngineStopping the Engine Engaging the PTODisengaging the PTO Driving the MachineAdjusting the Cutting Height Driving ForwardAdjusting the Anti-Scalp Rollers Transporting Transporting a UnitLoading a Unit Maintenance Recommended Maintenance SchedulesCheck Battery Charge Check Engine Oil LevelRecommended Jump Starting Procedure Do Not jump start a weak battery if these conditions existCheck Mower Blades Check Safety Interlock System Check Rollover Protections Systems Roll Bar KnobsCheck Seat Belt Change Engine Oil Service Air CleanerCheck for Loose Hardware Check Hydraulic Oil LevelLubricate Grease Fittings Check Tire PressuresCheck Condition Of Belts Lubricate Caster Wheel HubsCheck Spark Plugs Lubricate Brake Handle PivotLubricate Deck Lift Pivot Change Fuel FilterWheel Hub Slotted Nut Torque Specification Change Hydraulic System Filter and FluidCopper-Based Anti-seize Check Spark Arrester if equippedThread Locking Adhesives Dielectric GreaseAdjustments Deck LevelingPump Drive Belt Tension Deck Belt TensionAdjusting the Parking Brake Left Hand Brake ShownElectric Clutch Adjustment Removing the Shim Motion Control Linkage Adjustment Motion Control Damper Adjustment Motion Control Neutral Lock Pivot AdjustmentMotion Control Handle Adjustment Caster Pivot Bearings Pre-Load Adjustment Adjusting the TiltClean Hydro Fan Cooling Fins Clean Engine and Exhaust System AreaRemove Engine Shrouds and Clean Cooling Fins Clean Debris From MachineBattery Disposal Troubleshooting Problem Possible Cause Corrective ActionSee Drive Wheel Release Valves section Troubleshooting Schematics Diagram All units except Kohler EFISchematics Electrical Logic Schematic All units except Kohler EFI Schematics Hydraulic Diagram General Warranty Conditions and Products Covered Page Page Service Record Date Description of Work Done Service Done ByPage This page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 52 pages 57.34 Kb Manual 60 pages 42.39 Kb Manual 60 pages 43.2 Kb Manual 52 pages 8.82 Kb

920 specifications

The Exmark 920 is an exceptional piece of equipment tailored for professionals and enthusiasts alike. Designed with an emphasis on performance and reliability, this mower embodies the pinnacle of lawn care technology. Known for its robust construction, the Exmark 920 is equipped with a powerful engine, ensuring efficient and effective mowing even in demanding conditions.

One of the standout features of the Exmark 920 is its cutting deck. With a 52-inch or 60-inch mower deck option, it allows users to cover a large mowing area quickly. The deck is crafted from high-strength steel, providing durability and longevity while maintaining a lightweight design that enhances maneuverability. Innovative blade design promotes superior airflow for an even cut, preventing clumping and ensuring a polished finish across various grass types.

The Exmark 920 utilizes advanced technology, including the innovative RED Technology, which enhances engine performance by optimizing power consumption. This results in reduced fuel consumption while maintaining the required power output for demanding tasks. Additionally, the mower’s intuitive controls include a user-friendly interface, allowing for easy adjustments and settings, catering to the varying needs of different lawn types and conditions.

Another notable feature of the Exmark 920 is its all-day comfort design. With an ergonomic seat and advanced suspension system, operators can tackle long mowing sessions without discomfort. The padded seat is adjustable, providing maximum support to minimize fatigue, while the suspension system absorbs bumps and uneven terrain for a smoother ride.

Furthermore, the Exmark 920 prioritizes serviceability. Easy access points for maintenance and a well-designed layout ensure that routine tasks, such as oil changes and blade replacements, can be completed efficiently. The model also comes equipped with LED headlights for improved visibility during early morning or late evening mowing.

In summary, the Exmark 920 is a sophisticated mower combining power, advanced technology, and design for comfort and utility. Its high-performance engine, durable cutting deck, user-friendly controls, and serviceable layout make it an ideal choice for anyone seeking to achieve a well-manicured lawn with professional results. Whether for commercial or residential use, the Exmark 920 stands out as a leading option in the market, enabling users to tackle any mowing challenge with confidence and ease.