Exmark 4500-759 Rev A Adjusting the Front Reference/Speed Control Bar, Operating the Platform

Page 22

Operation

Figure 10

To turn left or right, release pressure on the motion control lever toward the desired turn direction.

3.To stop, position both motion control levers in the neutral operate position.

Adjusting the Front Reference/Speed Control Bar

Adjust the front reference/speed control bar for desired maximum forward speed.

1.Stop the machine and move the motion control levers to the neutral position.

2.Disengage the PTO.

3.Unlock the handles on both sides of the control tower by pulling outward (see Figure 11).

Figure 11

1.

Front of the machine

4.

Forward position —

 

 

 

faster

2.

Control tower

5.

Backward position —

 

 

 

slower

3.

Unlock

6.

Lock

4.Move the bar forward to obtain the fastest speed.

Move the bar backward to obtain the slowest speed.

5.On both sides, rotate and push the handles inward to lock the handles against the control tower.

Important: Make sure the handles are locked in place so the front reference/speed control bar does not move during operation.

Operating the Platform

The machine can be used with the platform in the up or down position. It is the operator’s preference on which position to use.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Vantage California Introduction Contents Safe Operating Practices SafetySafety Alert Symbol TrainingSafety Operation Slope OperationMaintenance and Storage Safety Safety and Instructional Decals 116-0404 116-2040 116-3267 116-3283 116-3290 116-1887 116-4181 116-4647 116-5040 EFI Only Model Numbers SpecificationsSystems Dimensions Product Overview Torque RequirementsOperation ControlsFuel Shut-Off Valve Ignition Switch Hour MeterFuel Gauge Pre-Start Operating InstructionsDisengaging the PTO PTO EngagementStopping the Engine Driving the Machine Driving ForwardAdjusting the Front Reference/Speed Control Bar Operating the PlatformOperating the Machine with the Platform Up Operating the Machine with the Platform DownTransporting Adjusting the Cutting HeightTransporting a Unit Loading a Unit Maintenance Recommended Maintenance SchedulesCheck Battery Charge Check Engine Oil LevelRecommended Jump Starting Procedure Do Not jump start a weak battery if these conditions existRelease the Cushion for Rear Access Check Mower BladesCheck Safety Interlock System Safety interlock system is designed to stopChange Engine Oil Service Air CleanerCheck for Loose Hardware Check Hydraulic Oil LevelLubricate Grease Fittings Check Tire PressuresCheck Condition Of Belts Lubricate Caster Wheel HubsChange Fuel Filter Check Spark PlugsChange Hydraulic System Filter and Fluid Hydraulic System Air Purge LevelWheel Hub Nut Torque Specification Check Spark Arrester if equippedCopper-Based Anti-seize Thread Locking AdhesivesMobil HTS Grease Or Food-Grade Anti-seize Dielectric GreaseAdjusting the Cutting Deck Rake Pump Drive Belt Tension Adjusting the Rear of the DeckPark Brake Adjustment Mower Deck Drive Belt TensionChecking the Tire Pressure in Drive System Electric Clutch Adjustment Removing the ShimMotion Control Neutral Adjustment Motion Control Tracking Adjustment Check the Neutral Switch AlignmentAdjust RH Motion Control Handle Position Caster Pivot Bearings Pre-Load Adjustment Remove Engine Shrouds and Clean Cooling Fins Clean Engine and Exhaust System AreaClean Grass Build-Up Under Deck Clean Debris From MachineMaintenance Troubleshooting Problem Possible Cause Corrective ActionTroubleshooting Troubleshooting Schematics Electrical Diagram-All Units Except Kohler EFIElectrical Diagram-Kohler EFI Electrical Schematic-All Units Except Kohler EFI Electrical Schematic-Kohler EFI Hydraulic Diagram General Warranty Conditions and Products Covered Page Service Record Date Description of Work Done Service Done ByPage This page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options

4500-759 Rev A specifications

The Exmark 4500-759 Rev A represents an innovative leap in turf management equipment, designed to enhance the efficiency and effectiveness of landscaping professionals. As a leading name in the lawn care industry, Exmark has equipped this model with state-of-the-art technologies and features that cater to both commercial and residential users.

One of the standout characteristics of the Exmark 4500-759 Rev A is its robust engine performance. Powered by a high-efficiency engine, it delivers consistent power and torque, allowing for seamless operation across diverse terrains. This engine is complemented by advanced cooling systems, ensuring optimal temperature management during extended use, which ultimately prolongs the equipment's lifespan.

The cutting system on the 4500-759 Rev A is another highlight, featuring Exmark’s patented cutting deck design. The advanced blade and deck configuration promotes superior grass dispersion and minimizes clumping, resulting in a polished finish that landscapers strive to achieve. The adjustable cutting height feature allows users to tailor the lawn height to their preference, making it versatile for various types of grass and seasonal conditions.

Operator comfort and ease of use are paramount in the design of the Exmark 4500-759 Rev A. The ergonomically designed seat and user-friendly controls provide a smooth driving experience. The intuitive dashboard offers easy access to critical information about the mower’s operation, ensuring that operators can focus on the task at hand without any distractions.

Additionally, this model incorporates innovative technology with its integrated GPS tracking system, which enhances efficiency by allowing users to monitor location and performance remotely. This feature not only aids in job tracking but also supports maintenance scheduling, optimizing service intervals and reducing downtime.

Furthermore, the Exmark 4500-759 Rev A is built with durability in mind. The heavy-duty frame and reinforced components withstand rigorous use, ensuring long-lasting performance in demanding environments. The model's versatility enables it to adapt for various landscaping tasks, from mowing to mulching, making it a valuable tool for professionals.

In conclusion, the Exmark 4500-759 Rev A is a powerful and versatile mower equipped with advanced technologies that simplify lawn care while maximizing results. Its combination of performance, comfort, and durability positions it as an essential choice for those in the landscaping industry, empowering users to achieve their desired outcomes with confidence.
Top Page Image Contents