Exmark Lazer Z XP manual Maintenance and Storage

1.4.17DO NOT mow with the discharge deflector raised, removed, or altered unless there is a grass collection system or mulch kit in place and working properly.

1.4.18Be Aware of the mower discharge and direct discharge away from others.

1.4.19DO NOT operate the mower under the influence of alcohol or drugs.

1.4.20Use extra care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

1.4.21If jump starting is required:

a)connect the positive (+) power cable from the positive post on the booster battery to the positive post on the battery.

b)connect the negative or ground cable (-) from the negative post on the booster battery to the engine block as far away from the battery as possible.

c)disconnect battery cables in the reverse order after starting.

1.5MAINTENANCE AND STORAGE

1.5.1For engine maintenance, follow the engine manufacturer’s recommendations precisely as stated in the engine manual.

1.5.2Disconnect the battery cable from the negative battery post when the unit will be allowed to sit for more than 30 days without use.

1.5.3Allowing batteries to stand for an extended period of time without recharging them will result in reduced performance and service life. To preserve optimum battery performance and life, recharge batteries in storage when the open circuit voltage drops to 12.4 volts.

Note: To prevent damage due to freezing, battery should be fully charged before putting away for winter storage.

1.5.4Keep engine and engine area free from accumulation of grass, leaves, excessive grease or oil, and other debris, which can accumulate in these areas. These materials can become flammable and may result in a fire.

1.5.5Store fuel in a container specifically designed for this purpose in a cool, dry place.

1.5.6Keep the mower and fuel container in locked storage to prevent children from playing or tampering with them.

1.5.7Gasoline or diesel fuel powered equipment or fuel containers should not be stored in a basement or any enclosed area where open pilot lights or heat appliances are present.

1.5.8Maximum mowing results and safety can only be achieved if the mower is

properly maintained and operated correctly.

1.5.9Check all bolts frequently to maintain proper tightness.

1.5.10Keep all guards, shields, and all safety devices in place and in safe working condition.

1.5.11Frequently check for worn or deteriorating components that could create a hazard.

1.5.12All replacement parts must be the same as or equivalent to the parts supplied as original equipment.

- 6 -