2.SPECIFICATIONS
2.1MODEL NUMBER:
LZ27DD604; LZ27DD724
2.2ENGINE:
2.2.1Engine Specifications: See your Engine Owner’s Manual
2.2.2 RPM: Full Speed: 3850 RPM (No Load) Idle: 1750 RPM
2.3FUEL SYSTEM
2.3.1Capacity: 15.5 gal. (56.8 L.)
2.3.2Type of Fuel: Diesel fuel, 40 cetane or higher
Note: Do not use kerosene or gasoline instead of diesel fuel.
Failure to observe this caution will damage the engine.
2.3.3Fuel Filter: Replaceable Canister
2.3.4Fuel
(Left tank, Right tank, “OFF”)
2.4ELECTRICAL SYSTEM
2.4.1Charging System: External Alternator
2.4.2Charging Capacity: 40 Amps
2.4.3Battery Type: BCI Group Size 26
2.4.4Battery Voltage: 12 Volt
2.4.5Polarity: Negative Ground
2.4.6Fuses: One 40 amp and one 20 amp blade type
2.4.7Safety Interlock System:
PTO must be disengaged, brake engaged, and motion control levers out (neutral lock) to start engine. (It is not necessary for the operator to be in the seat to start the engine.)
Operator must be in seat when PTO is engaged, brake is disengaged, or motion control levers are moved in or engine will stop.
Engine will stop if either the left, the right, or both levers are moved from neutral lock position while brake is engaged.
2.4.8Tilt Switch: Shuts off the engine when the unit is tilted more than 60° from horizontal.
2.5COOLING SYSTEM
2.5.1Fan: Hydraulic, continuous operation with engine running
2.5.2Coolant Liquid: 50/50 mix of
2.5.3Coolant Capacity: 2 gallons (7.6 L)
2.6OPERATOR CONTROLS
2.6.1Steering and Motion Control:
Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.
Steering is controlled by varying the position of the levers relative to each other. Moving motion control levers outward (in slots) locks the drive system in neutral. NOTE: Motion control levers are adjustable to two heights.
2.6.2PTO Engagement Switch: Engages electric clutch (to drive belts) which engage mower blades.
- 11 -