Exmark TT5217KAC, TT4817KAEC, TT4817KAC, TT3615KAC, TT5217KAEC manual Transporting

Page 28

4.3.6To Stop: Squeeze drive levers back to the neutral position. Move neutral lock latches into the neutral lock position and release drive levers. Move the speed control lever to the neutral position.

4.3.7PTO Engagement:

DANGER

POTENTIAL HAZARD

The rotating blades under the mower deck are dangerous.

WHAT CAN HAPPEN

Blade contact can cause serious injury or kill you.

HOW TO AVOID THE HAZARD

DO NOT put hands or feet under the mower or mower deck when the PTO is engaged.

Be sure that all persons are clear of mower deck and discharge area before engaging the PTO. Set throttle to “midway” position. Push the PTO engagement arm forward and down to engage blades. Accelerate to full throttle to begin mowing (See Section 4.1.5).

4.3.8PTO Disengagement: Pull upward and back completely on the PTO engagement arm to disengage the blades (See Section 4.1.5).

4.4TRANSPORTING

WARNING

POTENTIAL HAZARD

Loading the mower onto a trailer without strong enough or properly supported ramps could be dangerous.

WHAT CAN HAPPEN

The ramps could collapse causing the unit to fall, which could cause injury.

HOW TO AVOID THE HAZARD

Use proper ramps that are secured to the truck or trailer.

Keep feet and legs out from under the unit when loading and unloading.

If necessary, use assistance when loading.

Use a heavy duty trailer to transport the machine. Engage neutral lock latches and park brake, then block wheels. Securely fasten the machine to the trailer with straps, chains, cables, or ropes. Use a safety chain and be sure that the trailer has all necessary lighting and marking as required by law.

- 23 -

Image 28
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Safety SpecificationsAssembly Instructions Maintenance & AdjustmentsSafety Your Safety is InvolvedSafety Alert Symbol TrainingCarbon monoxide can kill you Potential Hazard Operation Page Maintenance and Storage Safety Signs Riding AttachmentsPage Page Page Specifications Dimensions TiresAssembly Instructions Torque RequirementsUpper Handle Mounting Speed Control Throttle Cable HOOK-UP Blade Engagement LinkagePage ECS Handles Drive Lever Linkage Installation Service Hydraulic OILStandard Pistol Grip Handles Operation InstructionsDrive LEVER, Neutral Lock Latch Operation Pre-Start Potential Hazard Operating Instructions Potential Hazard Transporting Maintenance & Adjustments Periodic MaintenancePotential Hazard Blade Bolt Installation Potential Hazard Service Interval After First 250 hrs, then yearly thereafter Charge Pump Location Grease Lubrication Chart Spray Lubricant ChartPage Adjustments Page Neutral Safety Switch Adjustment Hydro Drive Linkage Adjustment Hydro Control LINK/SWIVEL Adjustment Hydro Pump Spring Tension Setting Waste DisposalMotor OIL Disposal Drive Lever and Latch in Neutral PositionTrouble Shooting Battery DisposalMower Tracks to Left or Right Mower Cuts UnevenlyEngine Troubleshooting Table Engine TroubleshootingProblem Wiring Diagrams Hydraulic Diagram Warranty Limited Warranty Exmark Commercial Turf EquipmentPage Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care ALL Rights Reserved