Exmark 4500-355 manual Product Overview Operation, Controls, Operator Presence Control OPC, Levers

Operation

Product Overview				Operation
				Note: Determine the left and right sides of the
				machine from the normal operating position.
				Controls
				Operator Presence Control (OPC)
				Levers
				Located on the upper handle assembly directly above
				the handle grips.
				When these levers are depressed, the OPC system
				senses that the operator is in the normal operator’s
				position. When the levers are released, the OPC
				system senses that the operator has moved from the
				normal operating position and will kill the engine if
		Figure 3		either the speed control lever is not in the neutral
				position or the PTO is engaged (see Figure 4).
1.	ECS Handles	3.	Fuel Cap
2.	Controls	4.	Blade Spacers

Figure 4

1.OPC Lever

2.Rotate neutral lock latch downward for neutral lock position

3.Neutral Lock Latch

4.Drive Lever in neutral position

Drive Levers

Located on each side of the upper handle assembly ahead of and below the handle grips.

These levers individually control the speed and direction of each drive wheel. When the speed control lever is moved out of the neutral position and the neutral lock latches are moved into the drive position,

15