Operation
Product Overview
Figure 7
1. | Cut height adjustment | 3. Deck lift handle |
2. | Caster wheel |
|
|
|
|
Operation
Adjusting the Cutting Height
The cutting height of the mower deck is adjusted from 1 to 4 inches (2.5 cm to 10.2 cm) in 1/4 inch (.63 cm) increments.
1.Stop the machine and move the speed control levers to the neutral position.
2.Disengage the PTO.
3.Engage the park brake.
4.Stop the engine, remove the key and wait for all moving parts to stop.
5.Move cotter pins on four deck support pins to proper hole for height of cut desired.
Deck Raising and Lowering
Raising the Mower Deck into Service Position
1.Stop engine, wait for all moving parts to stop and remove key. Engage parking brake.
WARNING
Incorrectly raising or lowering a mower deck can be dangerous. A dropped mower deck can result in a serious injury or property damage.
•Always raise and lower deck on flat, dry ground, free of any obstructions.
•Firmly grasp the deck lift handle and lower in a slow controlled manner.
•Always make sure the deck is securely latched in the “up” or “down” position.
2.Release the deck locking pins on each side (Figure 8).
11