Operation
Figure 8
1.Deck lift handle
2.Rotate the deck locking pin toward the rear and pull outward to unlock.
3.Push the deck locking pin in and rotate toward the front to lock.
3.Using deck lift handle, lift deck up and latch in “up” position (latch is located at front center of seat) (see Figure 9).
WARNING
Operating the mower deck in the raised service position can be dangerous. Engaging the PTO with a deck in the raised position can result in a serious injury or property damage.
Always lower and lock mower deck in the operation position before engaging the PTO.
Lowering the Mower Deck to the Operating Position
1.While firmly holding onto deck lift handle, unhook deck latch from tractor section and slowly lower deck to ground (see Figure 9).
2.Push deck locking pins inward and rotate forward to securely lock deck in lowered position (see Figure 8).
WARNING
Operating mower without locking pins securely latched can result in the mower deck folding up unexpectedly. The mower deck folding up unexpectedly can cause serious injury.
Always operate mower with locking pins securely latched.
| Figure 9 |
1. Secure the deck in | 2. Hook |
the raised position by securing the deck latch onto the hook.
Adjusting Fill Reduction System (FRS) Baffles
The Navigator’s exclusive Fill Reduction System has been designed to allow you to reduce the amount of clippings collected by varying degrees.
Advantages include less frequent emptying of the hopper and return of nutrients to the soil.
Possible Configurations:
1.Baffles open, standard blades – Maximum collection
2.Baffles closed, standard blades – Partial mulching
3.Baffles closed, mulch blades – Intermediate mulching
4.Mulch plug installed, mulch blades – Complete mulching (requires mulch kit)
12