Hayter Mowers RT380H manual Product Overview, Checking the Traction Control Pedal, Controls

13

Checking the Traction Control Pedal

No Parts Required

Procedure

If the tractor drives too fast or slow with the traction control pedal fully pressed in either direction, you can adjust it to set the optimum forward and reverse speeds, as follows:

1.Loosen the screws below the right footrest.

2.Slide the pedal forward for a faster reverse speed or backward for a faster forward speed (Figure 12).

Figure 12

1. Traction control pedal 2. Adjusting screws

3.Tighten the screws.

4.Check the traction control pedal.

Product Overview

Controls

Become familiar with the controls (Figure 13) before you start the engine and operate the tractor.

Figure 13

1.	Steering wheel	7.	Height-of-cut lever
2.	Light switch—on/off	8.	Parking brake lever
3.	Ignition switch	9.	Throttle lever
4.	Clutch/brake pedal	10.	Hood opening
5.	Blade control (PTO)	11.	Operating-in-reverse light
6.	Traction control pedal	12.	Reverse interlock switch

16