Husqvarna 353 E-tech, 353G E-tech, 346XPG E-tech, 346XP E-tech, 1153178-95 manual Stopping, Risk

Page 21

STARTING AND STOPPING

throttle latch in order to avoid unnecessery wear on the clutch assembly.

Note! Pull the front hand guard towards the front handle. The chain brake is now disengaged.Your saw is ready for use.

	!	WARNING! Long term inhalation of the
	!	engine’s exhaust fumes, chain oil mist and
		engine’s exhaust fumes, chain oil mist and
		dust from sawdust can represent a health
		risk.

•Never start a chain saw unless the bar, chain and all covers are ﬁtted correctly. See instructions under the heading Assembly. Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injury.

•The chain brake should be activated when starting. Se instructions under the heading Start and stop. Do not drop start. This method is very dangerous because you may lose control of the saw.

•Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

•Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

•Always hold the saw with both hands. The right hand should be on the rear handle, and the left hand on the front handle. All people, whether right or left handed, should use this grip. Use a ﬁrm grip with thumbs and ﬁngers encircling the chain saw handles.

Stopping

The engine is stopped by pushing the stop switch to the stop position.

English – 21

Image 21

Contents Operator’s manual Symbols on the machine KEY to SymbolsEPA Symbols in the operator’s manualContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutCutting equipment Stop switchRight hand guard Vibration damping systemCutting equipment designed to reduce kickback General rulesBar ChainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingIncreases the risk of kickback Sharpening cutting teethAdjustment of depth gauge setting General advice on adjusting depth gauge settingTensioning the chain LargeLubricating cutting equipment Chain drive sprocket When the chain touches the operatorNeedle bearing lubrication Checking wear on cutting equipmentAssembly Fitting the bar and chainWorking with the chain Fuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineRisk StoppingWorking Techniques Basic safety rulesBefore use General working instructionsClutch cover causing the chain to CleaningJam. Always stop the engine before Basic cutting technique TermsLimbing Logs are lying together. Such Tree felling techniqueOr fatal injury Safe distanceClearing the trunk and preparing your retreat Felling directionTraining we advise you not to fell trees Your sawFelling cut Directional cutsHow to avoid kickback What is kickback?Freeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral High speed jet H Correctly adjusted carburetorChecking the brake trigger Mufﬂer Starter Changing a broken or worn starter cordTensioning the recoil spring Air ﬁlter Replacement of broken recoil and drive disc springsSpark plug Fitting the starterWhen making adjustments Adjustment of the oil pumpLubricating the bar tip sprocket Needle bearing lubricationTemperature 0C 32F or colder Air Injection centrifugal cleaningHeated handles Electrical carburetor heatingDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain ﬁling and ﬁle gauges Bar and chain combinations050/1,3 mm 058/1,5 mmYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsPage Original instructions 1153178-95