KEY TO SYMBOLS
Symbols on the machine:
WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
•Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator′s hands must be used to operate the chain saw.
Never operate a chain saw holding it with one hand only.
Never let the guide bar tip come in contact with any object.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up
and towards the operator. May cause serious personal injury. Kickback may
occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury.
Decompression valve: The valve is to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine.
Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position.
Air purge
Adjustment of the oil pump
If your machine bears this symbol it is equipped with a catalytic converter.
Chain brake, activated (right) Chain brake, not activated (left)
Other symbols/decals on the machine refer to special certification requirements for certain markets.
The engine exhaust from this product contains chemical known to the State of California to cause cancer, birth defects or other reproductive harm.
2 – English