Husqvarna 536 LIXP, 436 LI Symbols in the operator’s manual

Page 3

KEY TO SYMBOLS

Symbols in the operator’s manual:

You will ﬁnd the following decals on your machine, battery and battery charger.

Deactivate the machine by pressing the start/stop button on the keypad. CAUTION! In order to prevent unintentional starting, the battery must be removed from the machine when assembling, checking and/or performing maintenance.

Always remove the battery from the machine when assembling, checking and/or performing maintenace.

Li-ion

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

The chain brake must be engaged when the chain saw is started.

WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury.

English – 3

Image 3

Contents 436 Li, 536 LiXP KEY to Symbols Symbols on the machineSymbols on the battery and/or on the battery charger Symbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?General power tool safety warnings General Safety PrecautionsCauses and operator prevention of kickback Battery tool use and careService Chain saw safety warningsBefore using a new chain saw Personal protective equipment Always use common senseChain brake and front hand guard Machine′s safety equipmentAutomatic switch off functionality KeypadGeneral Safety Precautions Battery and battery charger Battery charger safety Cutting equipmentGeneral rules Cutting equipment designed to reduce kickback General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingToo large General advice on adjusting depth gauge settingAdjustment of depth gauge setting Tensioning the chainLiXP 436 LiLubricating cutting equipment Filling with chain oil Checking chain lubricationChain drive sprocket Checking wear on cutting equipment Assembly Fitting the bar and chainWorking with the chain Fitting a spike bumper Battery Handling BatteryBattery charger Disposal of the battery, battery charger and machine Transport and storageLED display Charging status Starting Starting and StoppingStarting and stopping StartingStopping SavE Basic safety rulesWorking Techniques Before useGeneral rules General Basic cutting techniqueNot safely controlled with one hand Handles with both handsFelling direction Tree felling techniqueLog is supported at both ends. There is a high risk Safe distanceDirectional cuts Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Your sawFreeing a trapped tree Freeing a tree that has fallen badlyWhat is kickback? How to avoid kickbackCutting the trunk into logs Checking the inertia brake release MaintenanceGeneral Checking the front hand guardBattery connectors Power trigger lockoutLubricating the bar tip sprocket Cooling system Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleKeypad Possible faults Possible action Troubleshooting scheduleBattery Battery chargerTechnical data Technical DataGuide bar and saw chain combinations Saw chain ﬁling and ﬁle gauges EC-declaration of conformityApplies to Europe only Page Page 1154476-26