Husqvarna 436 LI Maintenance schedule, Daily maintenance Weekly maintenance Monthly maintenance

Page 38

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

 

Check the connections between the

Clean the outside of the machine.

File off any burrs from the edges of

battery and the machine and also

the bar.

check the connection between battery

 

 

 

and the battery charger.

 

 

 

Check that the components of the

 

Empty the oil tank and clean the

power trigger work safely. (Power

 

 

inside.

trigger lockout and power trigger.)

 

 

 

 

 

 

Clean the chain brake and check that

 

Blow through the product and battery

it operates safely. Make sure that the

 

 

cooling slots gently with compressed

chain catcher is undamaged, and

 

 

air.

replace it if necessary.

 

 

 

 

 

 

The bar should be turned daily for

 

 

more even wear. Check the

 

 

lubrication hole in the bar, to be sure it

 

 

is not clogged. Clean the bar groove.

 

 

If the bar has a sprocket tip, this

 

 

should be lubricated.

 

 

 

 

 

Check that the bar and chain are

 

 

getting sufficient oil.

 

 

 

 

 

Check the saw chain with regard to

 

 

visible cracks in the rivets and links,

 

 

whether the saw chain is stiff or

 

 

whether the rivets and links are

 

 

abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its

 

 

tension and condition. Check the drive

 

 

sprocket for excessive wear and

 

 

replace if necessary.

 

 

 

 

 

Clean the machines air inlet.

 

 

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the keypad works correctly

 

 

and is not damaged.

 

 

 

 

 

38 – English

Page 37 Page 39
Image 38
Page 37 Page 39
Contents 436 Li, 536 LiXP Symbols on the battery and/or on the battery charger KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions General power tool safety warningsChain saw safety warnings Battery tool use and careService Causes and operator prevention of kickbackBefore using a new chain saw Always use common sense Personal protective equipmentKeypad Machine′s safety equipmentAutomatic switch off functionality Chain brake and front hand guardGeneral Safety Precautions Battery and battery charger General rules Battery charger safetyCutting equipment Cutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Too largeLubricating cutting equipment LiXP436 Li Chain drive sprocket Filling with chain oilChecking chain lubrication Checking wear on cutting equipment Working with the chain AssemblyFitting the bar and chain Fitting a spike bumper Battery charger Battery HandlingBattery LED display Charging status Disposal of the battery, battery charger and machineTransport and storage Starting Starting and StoppingStarting and stopping StartingStopping Before use Basic safety rulesWorking Techniques SavEGeneral rules Handles with both hands Basic cutting techniqueNot safely controlled with one hand GeneralSafe distance Tree felling techniqueLog is supported at both ends. There is a high risk Felling directionYour saw Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Directional cutsFreeing a tree that has fallen badly Freeing a trapped treeHow to avoid kickback What is kickback?Cutting the trunk into logs Checking the front hand guard MaintenanceGeneral Checking the inertia brake releaseLubricating the bar tip sprocket Battery connectorsPower trigger lockout Cooling system Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceBattery charger Troubleshooting scheduleBattery Keypad Possible faults Possible actionTechnical Data Technical dataApplies to Europe only Guide bar and saw chain combinationsSaw chain filing and file gauges EC-declaration of conformity Page Page 1154476-26
Top Page Image Contents