Husqvarna 536 LIXP, 436 LI manual Cooling system, Battery

Page 37

MAINTENANCE

Cooling system

Li-ion

To keep the working temperature as low as possible the machine is equipped with a cooling system.

The cooling system consists of:

1Air intake (left side of the machine).

2A fan on the motor.

•Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in overheating which causes damage to the machine.

Battery

Li-ion

•Make sure the battery is not damaged or deformed and that there are no visible defects such as cracks.

Battery charger

Li-ion

•Make sure the battery charger and the power supply cord is not damaged or deformed and that there are no visable defects such as cracks.

English – 37

Image 37

Contents 436 Li, 536 LiXP Symbols on the machine KEY to SymbolsSymbols on the battery and/or on the battery charger Symbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?General power tool safety warnings General Safety PrecautionsService Battery tool use and careChain saw safety warnings Causes and operator prevention of kickbackBefore using a new chain saw Personal protective equipment Always use common senseAutomatic switch off functionality Machine′s safety equipmentKeypad Chain brake and front hand guardGeneral Safety Precautions Battery and battery charger Cutting equipment Battery charger safetyGeneral rules Cutting equipment designed to reduce kickback General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingAdjustment of depth gauge setting General advice on adjusting depth gauge settingTensioning the chain Too large436 Li LiXPLubricating cutting equipment Checking chain lubrication Filling with chain oilChain drive sprocket Checking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fitting a spike bumper Battery Battery HandlingBattery charger Transport and storage Disposal of the battery, battery charger and machineLED display Charging status Starting and stopping Starting and StoppingStarting StartingStopping Working Techniques Basic safety rulesBefore use SavEGeneral rules Not safely controlled with one hand Basic cutting techniqueHandles with both hands GeneralLog is supported at both ends. There is a high risk Tree felling techniqueSafe distance Felling directionFelling Training we advise you not to fell trees Clearing the trunk and preparing your retreatYour saw Directional cutsFreeing a trapped tree Freeing a tree that has fallen badlyWhat is kickback? How to avoid kickbackCutting the trunk into logs General MaintenanceChecking the front hand guard Checking the inertia brake releasePower trigger lockout Battery connectorsLubricating the bar tip sprocket Cooling system Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleBattery Troubleshooting scheduleBattery charger Keypad Possible faults Possible actionTechnical data Technical DataSaw chain ﬁling and ﬁle gauges EC-declaration of conformity Guide bar and saw chain combinationsApplies to Europe only Page Page 1154476-26