Husqvarna 436 LI, 536 LIXP manual Stopping

Page 26

STARTING AND STOPPING

Stopping

The machine is deactivated by pressing the start/stopp button on the keypad (green LED off).

Note! To avoid involuntary start up, the battery must always be removed when the machine is not in use or is unsupervised. To remove the battery, withdraw it from the machine while pressing the battery release buttons on the battery.

26 – English

Image 26

Contents 436 Li, 536 LiXP Symbols on the battery and/or on the battery charger KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions General power tool safety warningsChain saw safety warnings Battery tool use and careService Causes and operator prevention of kickbackBefore using a new chain saw Always use common sense Personal protective equipmentKeypad Machine′s safety equipmentAutomatic switch off functionality Chain brake and front hand guardGeneral Safety Precautions Battery and battery charger General rules Battery charger safetyCutting equipment Cutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Too largeLubricating cutting equipment LiXP436 Li Chain drive sprocket Filling with chain oilChecking chain lubrication Checking wear on cutting equipment Working with the chain AssemblyFitting the bar and chain Fitting a spike bumper Battery charger Battery HandlingBattery LED display Charging status Disposal of the battery, battery charger and machineTransport and storage Starting Starting and StoppingStarting and stopping StartingStopping Before use Basic safety rulesWorking Techniques SavEGeneral rules Handles with both hands Basic cutting techniqueNot safely controlled with one hand GeneralSafe distance Tree felling techniqueLog is supported at both ends. There is a high risk Felling directionYour saw Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Directional cutsFreeing a tree that has fallen badly Freeing a trapped treeHow to avoid kickback What is kickback?Cutting the trunk into logs Checking the front hand guard MaintenanceGeneral Checking the inertia brake releaseLubricating the bar tip sprocket Battery connectorsPower trigger lockout Cooling system Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceBattery charger Troubleshooting scheduleBattery Keypad Possible faults Possible actionTechnical Data Technical dataApplies to Europe only Guide bar and saw chain combinationsSaw chain ﬁling and ﬁle gauges EC-declaration of conformity Page Page 1154476-26