Husqvarna 600CRT Attach Clutch Cable See Fig, Connect Shift ROD See Fig, Remove Tiller from Crate

Page 7

ASSEMBLY

ATTACH CLUTCH CABLE (See Fig. 6)

•Hook end of clutch cable through hole in control bar bracket.

CONTROL BAR

BRACKET

CONTROL

BAR

CLUTCH

CABLE

CONTROL BAR

BRACKET

END OF CLUTCH

CABLE

FIG. 6

CONNECT SHIFT ROD (See Fig. 7)

•Insert end of shift rod into hole of shift lever indicator.

•Insert hairpin clip through hole of shift rod to secure.

	SHIFT	HAIRPIN	SHIFT
			LEVER
		CLIP
	ROD
			INDICATOR

FIG. 7

REMOVE TILLER FROM CRATE

•Make sure shift lever indicator is in “N” position (See Fig. 7)

•Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield.

•Rotate tiller handle to the right and pull tiller out of carton.

CHECK TIRE PRESSURE

The tires on your unit were overinflated at the factory for shipping purposes. Correct and equal tire pressure is important for best tilling performance.

•Reduce tire pressure to 20 PSI (1.4 kg/cm2).

HANDLE HEIGHT

•Handle height may be adjusted to better suit operator. (See “TO ADJUST HANDLE HEIGHT” in the Service and Adjustments section of this manual).

7

Image 7

Contents 600CRT Operation Maintenance and StorageTraining PreparationCustomer Responsibilities Product SpecificationsTable of Contents Tools Required for Assembly AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateOperation Meets Ansi Safety RequirementsKnow Your Tiller Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedADD Gasoline Before Starting EngineTurning To TransportTilling Hints Tine Shear PinsTo Start Engine See Fig CultivatingBefore Each USE Lubrication ChartCustomer Responsibilities General RecommendationsAIR Filter See Fig EngineCooling System See Fig Cleaning Service and AdjustmentsTiller To Remove Belt Guard See Fig Ground Drive Belt Adjustment See FigTo Replace Ground Drive Belt See Fig Tine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsHandle Assembly Repair PartsKEY Part Description NO. no MAINFRAME, Left SideMAINFRAME, Right Side 532154354 Transmission Assembly Includes Key Nos Tine Shield Tine Assembly Decals Tiller Model no CRT 954140070AHusqvarna Forest & Garden CO Warranty StatementRev 9.28.98 TR