Husqvarna 345e EPA II, 346XP EPA I, 353 EPA II manual Maintenance schedule

Page 38

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain brake

 

for wear. Replace when less than 0.024

Clean the outside of the machine.

converter, check the cooling system

inch (0.6 mm) remains at the most worn

 

weekly.

 

point.

 

 

 

 

 

Check that the components of the throttle

Check the starter, starter cord and return

Check the clutch centre, clutch drum and

control work safely. (Throttle lockout and

spring.

clutch spring for wear.

throttle control.)

 

 

 

 

 

Clean the chain brake and check that it

 

 

operates safely. Make sure that the chain

Check that the vibration damping

Clean the spark plug. Check that the

catcher is undamaged, and replace it if

elements are not damaged.

electrode gap is 0.020 inch (0.5 mm).

necessary with an aluminium chain

 

 

catcher (is available as spare part).

 

 

 

 

 

The bar should be turned daily for more

 

 

even wear. Check the lubrication hole in

 

 

the bar, to be sure it is not clogged. Clean

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

the bar groove. If the bar has a sprocket

 

 

tip, this should be lubricated.

 

 

 

 

 

Check that the bar and chain are getting

File off any burrs from the edges of the

Check fuel hose for cracks or other

sufficient oil.

bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to visible

 

 

cracks in the rivets and links, whether the

Clean or replace the spark arrestor

 

saw chain is stiff or whether the rivets and

screen on the muffler.

Empty the fuel tank and clean the inside.

links are abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its tension

 

 

and condition. Check the drive sprocket

Clean the carburetor compartment.

Empty the oil tank and clean the inside.

for excessive wear and replace if

 

 

necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if necessary.

Check all cables and connections.

 

 

 

Check that nuts and screws are tight.

Clean the area under the cover for the

 

right-hand brake.

 

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks from

 

 

the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic converter,

 

 

check the cooling system daily.

 

 

 

 

 

Make sure the mechanism for the right-

 

 

hand brake operates smoothly.

 

 

 

 

 

38 – English

Page 37 Page 39
Image 38
Page 37 Page 39
Contents TrioBrake Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesSharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackSharpening cutting teeth General advice on adjusting depth gauge settingAdjustment of depth gauge setting 345e TrioBrake Tensioning the chain346XP TrioBrake, 353 TrioBrake Filling with chain oil Lubricating cutting equipmentChain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication 346XP TrioBrake, 353 TrioBrake AssemblyFitting the bar and chain 345e TrioBrakeAssembly Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Terms Basic cutting techniqueGeneral Limbing CuttingFelling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatFelling Directional cutsFreeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tensionCutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburetor adjustment Correctly adjusted carburetor High speed jet HChecking the brake trigger Changing a broken or worn starter cord MufflerStarter Fitting the starter Replacement of broken recoil and drive disc springsTensioning the recoil spring Lubricating the bar tip sprocket Air filterSpark plug Needle bearing lubricationCooling system Adjustment of the oil pumpAir Injection centrifugal cleaning Heated handlesTemperature 0C 32F or colder Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gaugesFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsKickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautionsPage 1150389-95 ´z+RF¶5&¨ ´z+RF¶5&¨

345e EPA II, 346XP EPA I, 353 EPA II specifications

Husqvarna is a renowned name in outdoor power equipment, and its chainsaws exemplify performance, durability, and advanced technology. Among their impressive lineup, the Husqvarna 345e EPA II, 346XP EPA I, and 353 EPA II stand out due to their unique features and capabilities tailored for both professional and casual users.

The Husqvarna 345e EPA II is designed for optimal power-to-weight ratio, making it a favorite for professionals who need mobility without sacrificing performance. This model is powered by a 50.1 cc engine that delivers a robust 3.2 horsepower, providing ample power for demanding cutting tasks. The 345e features a lightweight design, which reduces fatigue during extended use. It also incorporates the X-Torq engine technology, which reduces fuel consumption and emissions, ensuring compliance with EPA regulations. Additionally, the chainsaw comes equipped with an inertia-activated chain brake for enhanced safety and a tool-less chain tensioning system for quick adjustments.

Next is the Husqvarna 346XP EPA I, a top choice for professional loggers and tree care specialists. This chainsaw features a 50.1 cc engine as well, but its unique design focuses on high performance and exceptional ergonomics. The 346XP is renowned for its rapid acceleration and high chain speed, which allow it to tackle tough cutting jobs with ease. Its Air Injection technology separates larger dust and debris, ensuring the air filter remains clean for longer periods, thereby reducing maintenance. This model is also equipped with the LowVib system that minimizes vibrations, enhancing user comfort during prolonged use.

Finally, the Husqvarna 353 EPA II is tailored for those seeking a middle ground between professional and casual use. This chainsaw features a 49.5 cc engine and balances power with user-friendly features. It is equipped with the same X-Torq engine technology found in the 345e, ensuring efficient fuel consumption and lower emissions. The 353 also boasts a well-designed handle for improved grip and control, making it ideal for various cutting tasks from firewood to felling trees. Its quick-release air filter makes maintenance straightforward, allowing users to focus more on their work.

Together, the Husqvarna 345e EPA II, 346XP EPA I, and 353 EPA II represent a blend of cutting-edge technology and user-oriented design, delivering reliability and performance, whether for professional use or home maintenance. Each model offers unique strengths, ensuring there is a perfect fit for every chainsaw user’s needs.
Top Page Image Contents