Husqvarna Rider 15V2 Checking and adjustment of the throttle wire, Replacing the fuel filter

Page 27

MAINTENANCE

Checking and adjustment of the throttle wire

Check that the engine responds to the throttle control and that the correct engine speed is achieved at full throttle.

If in doubt, contact the service workshop.

If adjustment is necessary, adjust the lower wire as follows:

1. Release the clamping screw that secures the wire casing and set the throttle control to full throttle.

2. Check that the throttle wire is attached to the

correct hole in the lower lever, see diagram.

8009-144

 

3.Pull the throttle wire casing to the far left and tighten the clamping screw.

Checking and adjusting the choke wire

If the engine is producing black smoke or is difficult to start then the choke wire (upper wire) may be incorrectly adjusted.

If in doubt contact your service workshop.

If it is necessary to adjust the choke, proceed as follows:

1.

Release the clamping screw that secures the

 

 

wire casing and set the choke control to maxi-

 

 

mum choke.

 

2.

Check that the throttle wire is attached to the

 

 

upper lever, see diagram.

 

3.

Pull the choke wire casing to the far right and

8009-145

 

tighten the clamping screw.

Replacing the fuel filter

Replace the pipe fitted fuel filter every 100 running hours (once per season) or more frequently if it is clogged.

Replace the filter as follows:

1.Fold open the engine cover.

2.Move the hose clips away from the filter. Use a pair of flat pliers.

3.Pull off the filter from the hose ends.

4.Press in the new filter on the hose ends. If necessary soap solution can be applied on the filter ends to simplify fitting.

5.Push the hose clips back on the filter.

8009-445

English – 25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Rider Svenska Contents III. Children Safe operation practices for ride-on mowersGeneral operation II. Slope operationIntended use IV. ServiceTravel and transport on public roads TowingTowing IntroductionDear customer Travel and transport on public roadsSerial number Good serviceStarting Instruction Explanation of SymbolsGeneral use Safety InstructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Parking brake Throttle controlChoke lever Speed limiterLift lever for cutting unit Cutting unitLever for adjustment of cutting height SeatFuelling Driving Before startingStarting the engine 6017-244 6017-245 Driving the machine Cutting tips Release lever Stopping the engineHours Before start 100 200 MaintenanceMaintenance schedule Daily Maintenance intervalRight-hand fender Removing the machine hoodsEngine hood Front hoodChecking and adjustment of the steering wires Adjusting the brakePoorly adjusted brakes can result in reduced braking power Checking and adjustment of the throttle wire Checking and adjusting the choke wireReplacing the fuel filter Varning Replacing the air filterCheck the level of the battery acid Checking of the fuel pump’s air filterFitting the wrong spark plug type can damage the engine Inspecting the safety system Main fuse Checking the tyre pressureChecking the engine’s cooling air intake Observe caution to avoid trapping your hand Fitting the cutting unitRemoving the cutting unit Checking and adjusting the cutting unit’s ground pressure Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitBelt change on Combi Replacing the cutting unit beltsBelt change on cutting unit with side ejection and Combi Placing in service position Service position for the cutting unit6017-221 6017-222 8009-122 6017-223 Restoring from service position Checking the blades Removal of BioClip plug Combi Replacing the break-pin CombiChecking the engine’s oil level LubricationChanging the oil filter Changing the oilLubricating the belt adjuster Checking the transmission’s oil levelGeneral lubrication Problem Procedure Trouble Shooting ScheduleCover ServiceStorage Winter storageTechnical Data Service Journal Pre-delivery serviceWork done Work done Date, mileage, stamp, sign Service Journal Service Journal ´z+H-¶5O¨ Page 114 01

Rider 15V2 specifications

The Husqvarna Rider 15V2 is a remarkable piece of gardening machinery that represents the pinnacle of innovation in compact, versatile riding mowers. Designed for both homeowners and professional landscapers, this model combines efficiency and precision in lawn care.

One of the standout features of the Rider 15V2 is its unique articulated steering system. This technology allows the rear wheels to follow the front wheels, which significantly enhances maneuverability. Gardeners can easily navigate around tight corners, flower beds, and obstacles without damaging the lawn. This feature is especially useful in landscaped gardens where navigating narrow pathways is often a challenge.

Equipped with a powerful 15 horsepower engine, the Rider 15V2 delivers robust performance, ensuring that it can tackle various types of terrain and vegetation. The engine is coupled with a hydrostatic transmission, providing seamless speed control without the need for shifting gears. This offers a more comfortable driving experience and reduces operator fatigue during extended mowing sessions.

The cutting deck of the Rider 15V2 can be easily adjusted to multiple cutting heights, ranging from 25 mm to 75 mm, which allows users to customize the cut according to their preference and grass type. This flexibility is essential for those who desire a well-manicured lawn throughout the mowing season. The deck's unique design also enables excellent grass collection and reduces clumping in various grass conditions.

Another notable characteristic is its compact size, making it easier to store than traditional riding mowers. Despite its smaller footprint, Husqvarna has engineered the Rider 15V2 to deliver exceptional cutting width, ensuring efficient coverage of larger areas without frequent turns or passes.

Additionally, the Rider 15V2 is equipped with intuitive controls that ensure ease of use for operators of all skill levels. The ergonomic seat and ergonomic steering wheel contribute to operator comfort, allowing for prolonged use without discomfort.

Overall, the Husqvarna Rider 15V2 is a powerful and innovative riding mower that merges advanced technology with practical design. Whether for residential or commercial purposes, it provides exceptional performance, unmatched maneuverability, and user-friendly features that make lawn care a breeze. With Husqvarna's commitment to quality and durability, this mower is built to last, ensuring reliable service for years to come.
Top Page Image Contents