Husqvarna Rider 15V2 manual Service Journal, Pre-delivery service, Work done

Page 49

SERVICE JOURNAL

Work done

Date, mileage, stamp, sign

Pre-delivery service

1.

Top up battery with acid and recharge for four hours.

 

2.

Fit steering wheel, seat and any optional equipment.

 

3.

Adjust cutting unit:

 

 

Adjust the lifting springs (the “weight” of the cutting unit should

 

 

be 12-15 kg/26,5-33 lbs). Only applies to Combi deck.

 

 

Adjust cutting unit so that rear edge is about 2–4 mm/1/8"

 

 

higher than front edge.

 

 

Adjust cutting unit height setting so that cutting height limit is

 

 

5 mm/3/16" above the frame of the unit at the lowest cutting

 

 

height.

 

4.

Check that engine has correct amount of oil.

 

5.

Check that the right amount of oil is in the transmission.

 

6.

Check and adjust tyre pressure (60 kPa/0.6 bar/8,5 PSI).

 

7.

Connect battery.

 

8.

Fill with fuel and start engine.

 

9.

Check that machine does not move in neutral.

 

10. Check:

 

 

Forward drive.

 

 

Reverse drive.

 

 

Operation of blades.

 

 

Seat safety switch.

 

 

Lift lever safety switch.

 

 

Safety switch for the hydrostat pedals.

 

11. Check engine revs 2 900±100rpm.

 

12. Tell customer about:

Pre-delivery service carried out.

 

 

 

Need and benefits of following the service schedule.

No outstanding problems.

 

 

 

The need and advantages of leaving the machine for regular

Certified:

 

service.

 

 

The effects of maintenance on the machine’s second hand

 

 

value.

 

 

Range of applications for BioClip.

 

13. Complete proof of sale, etc.

 

After first 8 hours 1. Change engine oil.

English – 47

Image 49
Contents Rider Svenska Contents General operation Safe operation practices for ride-on mowersII. Slope operation III. ChildrenTravel and transport on public roads IV. ServiceTowing Intended useDear customer IntroductionTravel and transport on public roads TowingSerial number Good serviceStarting Instruction Explanation of SymbolsGeneral use Safety InstructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Choke lever Throttle controlSpeed limiter Parking brakeLift lever for cutting unit Cutting unitSeat Lever for adjustment of cutting heightFuelling Before starting DrivingStarting the engine 6017-244 6017-245 Driving the machine Cutting tips Release lever Stopping the engineMaintenance schedule MaintenanceDaily Maintenance interval Hours Before start 100 200Engine hood Removing the machine hoodsFront hood Right-hand fenderAdjusting the brake Checking and adjustment of the steering wiresPoorly adjusted brakes can result in reduced braking power Checking and adjusting the choke wire Checking and adjustment of the throttle wireReplacing the fuel filter Varning Replacing the air filterChecking of the fuel pump’s air filter Check the level of the battery acidFitting the wrong spark plug type can damage the engine Inspecting the safety system Checking the tyre pressure Main fuseChecking the engine’s cooling air intake Observe caution to avoid trapping your hand Fitting the cutting unitRemoving the cutting unit Checking and adjusting the cutting unit’s ground pressure Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitBelt change on Combi Replacing the cutting unit beltsBelt change on cutting unit with side ejection and Combi Placing in service position Service position for the cutting unit6017-221 6017-222 8009-122 6017-223 Restoring from service position Checking the blades Removal of BioClip plug Combi Replacing the break-pin CombiChecking the engine’s oil level LubricationChanging the oil filter Changing the oilChecking the transmission’s oil level Lubricating the belt adjusterGeneral lubrication Problem Procedure Trouble Shooting ScheduleStorage ServiceWinter storage CoverTechnical Data Pre-delivery service Service JournalWork done Work done Date, mileage, stamp, sign Service Journal Service Journal ´z+H-¶5O¨ Page 114 01

Rider 15V2 specifications

The Husqvarna Rider 15V2 is a remarkable piece of gardening machinery that represents the pinnacle of innovation in compact, versatile riding mowers. Designed for both homeowners and professional landscapers, this model combines efficiency and precision in lawn care.

One of the standout features of the Rider 15V2 is its unique articulated steering system. This technology allows the rear wheels to follow the front wheels, which significantly enhances maneuverability. Gardeners can easily navigate around tight corners, flower beds, and obstacles without damaging the lawn. This feature is especially useful in landscaped gardens where navigating narrow pathways is often a challenge.

Equipped with a powerful 15 horsepower engine, the Rider 15V2 delivers robust performance, ensuring that it can tackle various types of terrain and vegetation. The engine is coupled with a hydrostatic transmission, providing seamless speed control without the need for shifting gears. This offers a more comfortable driving experience and reduces operator fatigue during extended mowing sessions.

The cutting deck of the Rider 15V2 can be easily adjusted to multiple cutting heights, ranging from 25 mm to 75 mm, which allows users to customize the cut according to their preference and grass type. This flexibility is essential for those who desire a well-manicured lawn throughout the mowing season. The deck's unique design also enables excellent grass collection and reduces clumping in various grass conditions.

Another notable characteristic is its compact size, making it easier to store than traditional riding mowers. Despite its smaller footprint, Husqvarna has engineered the Rider 15V2 to deliver exceptional cutting width, ensuring efficient coverage of larger areas without frequent turns or passes.

Additionally, the Rider 15V2 is equipped with intuitive controls that ensure ease of use for operators of all skill levels. The ergonomic seat and ergonomic steering wheel contribute to operator comfort, allowing for prolonged use without discomfort.

Overall, the Husqvarna Rider 15V2 is a powerful and innovative riding mower that merges advanced technology with practical design. Whether for residential or commercial purposes, it provides exceptional performance, unmatched maneuverability, and user-friendly features that make lawn care a breeze. With Husqvarna's commitment to quality and durability, this mower is built to last, ensuring reliable service for years to come.