Husqvarna Rider 15V2 manual Main fuse, Checking the tyre pressure

Page 31

MAINTENANCE

Main fuse

The fuse is located in a loose holder under the battery case cover, in front of the battery. Type: Flat-blade U-link, 15 A.

Do not use any other type of fuse when replacing. A blown fuse indicates that the U-link has burnt off. Pull the fuse out of the holder when replacing.

The fuse is used to protect the electrical system. If it blows again shortly after replacing, then there is a short circuit which must be rectified before the machine is used again.

Checking the tyre pressure

The tyre pressure should be 60 kPa (0.6 kp/cm2/8.5 PSI) all round.

To improve driving the pressure on the rear tyres can be reduced to 40 kPa (0.4 kp/cm2/5.6 PSI).

The maximum tyre pressure is 100 kPa (1.0 kp/cm2/14 PSI).

IMPORTANT INFORMATION

Different tyre pressures on the front tyres will result in the blades cutting the grass at different heights.

8009-370

6008-030

Checking the engine’s cooling air intake

Clean the air intake grille in the engine cover behind the driver’s seat.

Fold open the engine cover.

Check that the cooling intake is free from leaves, grass and dirt.

Check the air duct, located on the inside of the engine cover, ensure it is clean and does not rub against the cooling air intake.

A blocked cooling intake will interfere with the cooling of the engine, which can damage the engine.

WARNING!

The cooling air intake rotates when the engine is running. Mind your fingers.

8009-431

Air intake grille

8009-474

Cooling air intake

English – 29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Rider Svenska Contents III. Children Safe operation practices for ride-on mowersGeneral operation II. Slope operationIntended use IV. ServiceTravel and transport on public roads TowingTowing IntroductionDear customer Travel and transport on public roadsSerial number Good serviceStarting Instruction Explanation of SymbolsGeneral use Safety InstructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Parking brake Throttle controlChoke lever Speed limiterLift lever for cutting unit Cutting unitSeat Lever for adjustment of cutting heightFuelling Before starting DrivingStarting the engine 6017-244 6017-245 Driving the machine Cutting tips Release lever Stopping the engineHours Before start 100 200 MaintenanceMaintenance schedule Daily Maintenance intervalRight-hand fender Removing the machine hoodsEngine hood Front hoodAdjusting the brake Checking and adjustment of the steering wiresPoorly adjusted brakes can result in reduced braking power Checking and adjusting the choke wire Checking and adjustment of the throttle wireReplacing the fuel filter Varning Replacing the air filterChecking of the fuel pump’s air filter Check the level of the battery acidFitting the wrong spark plug type can damage the engine Inspecting the safety system Checking the tyre pressure Main fuseChecking the engine’s cooling air intake Observe caution to avoid trapping your hand Fitting the cutting unitRemoving the cutting unit Checking and adjusting the cutting unit’s ground pressure Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitBelt change on Combi Replacing the cutting unit beltsBelt change on cutting unit with side ejection and Combi Placing in service position Service position for the cutting unit6017-221 6017-222 8009-122 6017-223 Restoring from service position Checking the blades Removal of BioClip plug Combi Replacing the break-pin CombiChecking the engine’s oil level LubricationChanging the oil filter Changing the oilChecking the transmission’s oil level Lubricating the belt adjusterGeneral lubrication Problem Procedure Trouble Shooting ScheduleCover ServiceStorage Winter storageTechnical Data Pre-delivery service Service JournalWork done Work done Date, mileage, stamp, sign Service Journal Service Journal ´z+H-¶5O¨ Page 114 01

Rider 15V2 specifications

The Husqvarna Rider 15V2 is a remarkable piece of gardening machinery that represents the pinnacle of innovation in compact, versatile riding mowers. Designed for both homeowners and professional landscapers, this model combines efficiency and precision in lawn care.

One of the standout features of the Rider 15V2 is its unique articulated steering system. This technology allows the rear wheels to follow the front wheels, which significantly enhances maneuverability. Gardeners can easily navigate around tight corners, flower beds, and obstacles without damaging the lawn. This feature is especially useful in landscaped gardens where navigating narrow pathways is often a challenge.

Equipped with a powerful 15 horsepower engine, the Rider 15V2 delivers robust performance, ensuring that it can tackle various types of terrain and vegetation. The engine is coupled with a hydrostatic transmission, providing seamless speed control without the need for shifting gears. This offers a more comfortable driving experience and reduces operator fatigue during extended mowing sessions.

The cutting deck of the Rider 15V2 can be easily adjusted to multiple cutting heights, ranging from 25 mm to 75 mm, which allows users to customize the cut according to their preference and grass type. This flexibility is essential for those who desire a well-manicured lawn throughout the mowing season. The deck's unique design also enables excellent grass collection and reduces clumping in various grass conditions.

Another notable characteristic is its compact size, making it easier to store than traditional riding mowers. Despite its smaller footprint, Husqvarna has engineered the Rider 15V2 to deliver exceptional cutting width, ensuring efficient coverage of larger areas without frequent turns or passes.

Additionally, the Rider 15V2 is equipped with intuitive controls that ensure ease of use for operators of all skill levels. The ergonomic seat and ergonomic steering wheel contribute to operator comfort, allowing for prolonged use without discomfort.

Overall, the Husqvarna Rider 15V2 is a powerful and innovative riding mower that merges advanced technology with practical design. Whether for residential or commercial purposes, it provides exceptional performance, unmatched maneuverability, and user-friendly features that make lawn care a breeze. With Husqvarna's commitment to quality and durability, this mower is built to last, ensuring reliable service for years to come.
Top Page Image Contents