Husqvarna 260 ACX manual Working method

Page 12

2. PRESENTATION

Working method

Automower® automatically mows the lawn.

It continuously combines mowing and charging.

The charging station sends out a signal that Automower® can sense at a distance of 6 - 7 metres. The mower starts to search for the charging station when the battery charge becomes too low. Automower® does not mow when it is searching for the charging station.

When Automower® searches for the charging station it uses one or more of three different search methods: Irregular, Follow boundary wire and Follow guide wire. For more information about the search methods, see 2.3 Search method on page 13 and Follow loop in (3-2-2)on page 47.

When the battery is charged the mower reverses, turns around and leaves the charging station in a randomly selected direction within the exit sector 90° - 270°.

To make it easier for Automower® to reach all parts of the garden you can manually set how the mower will leave the charging station, see 6.5 Installation (3) on page 45.

Automower® 260 ACX is equipped with ultrasonic sensors that effectively sense both fixed and moveable obstacles that get in the mower’s way. When confronted with an obstacle the mower slows down to avoid an unnecessarily hard impact. When Automower® body hits an obstacle, the mower reverses and selects a new direction.

A further two sensors, one at the front and one at the back of Automower®, sense when the mower is approaching the boundary wire. Automower® overruns the wire by up to 27 centimetres before it turns. The overrun length can be set, see Drive past wire (3-4-1)on page 51.

The STOP button on the top of Automower® is mainly used to stop the mower when it’s running. When the STOP button is pressed a cover opens, behind which there is a control panel. The STOP button remains depressed until the cover is closed again. This acts as start inhibitor.

English - 11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Husqvarna Automower Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toFunction of Automower CapacityMowing technique Working method Movement pattern Search method 2 Follow boundary wire Search methodSearch method 1 Irregular Search method 3 Follow guide wire More than one Automower in a gardenOne Automower in several gardens Installation Carry out the installation in the following stepsPreparations Installation of the charging station Ideal position of the charging stationImportant Information Installation and connecting the charging station Charging the battery Installation of the boundary wireDo not tread or walk on the charging station plate Best position for the boundary wire Boundaries for the working area Boundaries within the working area Passages when mowing Passages when searching for the charging stationSecondary areas Slopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Charging a discharged battery UseUsing the timer Use of SMS functionStarting Automower Stopping AutomowerSwitching off Automower RestartRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Main switch SelectNumbers Menu functions Main menuBrowse between menus Number seriesInstallation Settings Automower main menuCommands TimerReset all timers YESStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allInstallation Reversing distanceStart angle 1 End angle 1To follow the boundary wire or a guide wire away Gardens where the front and back are joined by aPassage where the charging station cannot be When this function is activated Automower willDirection DistanceProportion Follow loopCorridor width Test Test OUT Settings PIN code Time lockAlarm SMSSet time Set dateTime format Date formatSounds Sound SignificanceProposed installation and settings Garden exampleExit angles Exit angles 250 Corridor width Garden Example Maintenance BatteryService Winter storageAutomower Charging stationCleaning After winter storageUnderframe and blade disc Do not use running water when cleaning Replacing the bladesChassis WheelsMaintenance Trouble shooting Fault messagesTrouble Shooting Fault symptom Technical data Environmental InformationData Automower 260 ACX EU declaration of conformity EU Declaration of Conformity only applies to Europe115 13
Related manuals
Manual 76 pages 48.62 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents