Husqvarna 260 ACX manual Use, Charging a discharged battery

Page 35

4. USE

4. Use

4.1 Charging a discharged battery

When Husqvarna Automower® is new or has been stored for a long period the battery will not be charged and needs to be charged before starting. Charging takes between 1 1/2 and 2 1/2 hours.

1.Place Automower® in the charging station. Insert the mower as far as possible.

Good contact is made when both the charging strips on the mower touch the centre of the contact strips on the charging station.

2.Open the control panel cover.

3.Set the main switch to the ON position.

Information about the charging process is shown on the display during the entire charging process.

WARNING

Read the safety instructions before you start your Automower®.

WARNING

Keep your hands and feet away from the rotating blades.

Never put your hands or feet close to or under the body when the motor is running.

34 - English

Image 35

Contents Husqvarna Automower Table of Contents Table of Contents Introduction Introduction SafetySymbols on Automower Important Information Xxxxxx xxxxx xxxx xxxx xxxxx Symbols in the Operator’s ManualXxxxxx xxxxx xxxx xxxx xxxxx Use Safety instructionsTransport MaintenancePresentation Numbers in the picture correspond to Automower, what’s what?Mowing technique Function of AutomowerCapacity Working method Movement pattern Search method 1 Irregular Search method 2 Follow boundary wireSearch method One Automower in several gardens Search method 3 Follow guide wireMore than one Automower in a garden Preparations InstallationCarry out the installation in the following steps Ideal position of the charging station Installation of the charging stationImportant Information Installation and connecting the charging station Do not tread or walk on the charging station plate Charging the batteryInstallation of the boundary wire Best position for the boundary wire Boundaries for the working area Boundaries within the working area Secondary areas Passages when mowingPassages when searching for the charging station Slopes Laying out the boundary wire Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire Installation Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wire Placement and connection of the guide wire Maximum 135º Use Charging a discharged batteryStopping Automower Using the timerUse of SMS function Starting AutomowerRestart after more than 20 seconds Switching off AutomowerRestart Restart within 20 secondsAdjusting the cutting height Control panel Shortcuts Numbers Main switchSelect Number series Menu functionsMain menu Browse between menusAutomower main menu Installation SettingsTimer CommandsMon Tue Wed Thu Fri Sat Sun Run all Reset all timersYES Start time 1 Stop time 1 Start time 2 Stop time 2End angle 1 InstallationReversing distance Start angle 1When this function is activated Automower will To follow the boundary wire or a guide wire awayGardens where the front and back are joined by a Passage where the charging station cannot beFollow loop DirectionDistance ProportionCorridor width Test Test OUT Settings Time lock PIN codeSMS AlarmDate format Set timeSet date Time formatSound Significance SoundsGarden example Proposed installation and settingsExit angles Exit angles 250 Corridor width Garden Example Battery MaintenanceCharging station ServiceWinter storage AutomowerUnderframe and blade disc CleaningAfter winter storage Wheels Do not use running water when cleaningReplacing the blades ChassisMaintenance Fault messages Trouble shootingTrouble Shooting Fault symptom Data Automower 260 ACX Technical dataEnvironmental Information EU Declaration of Conformity only applies to Europe EU declaration of conformity115 13

Related manuals

Manual 76 pages 48.62 Kb