Husqvarna 260 ACX manual Symbols in the Operator’s Manual, Xxxxxx xxxxx xxxx xxxx xxxxx

Page 6

1.INTRODUCTION AND SAFETY

1.3Symbols in the Operator’s

Manual

These symbols can be found in the Operator’s Manual. Study them carefully so you understand their significance.

•Inspection and/or maintenance must be carried out with the main switch set to OFF.

•Always wear protective gloves when working with the mower’s underframe.

•Never use a high-pressure washer or even running water to clean Automower®.

•A warning box indicates a risk of personal injury exist, especially when the stated instructions are not followed.

WARNING

Xxxxxx xxxxx xxxx xxxx xxxxx xxx.

•An information box indicates a risk of material damage exist, especially when the stated instructions are not followed. The box is also used where there is a risk of user error.

IMPORTANT INFORMATION Xxxxxx xxxxx xxxx xxxx xxxxx xxx.

English - 5

Image 6

Contents Husqvarna Automower Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toFunction of Automower CapacityMowing technique Working method Movement pattern Search method 2 Follow boundary wire Search methodSearch method 1 Irregular Search method 3 Follow guide wire More than one Automower in a gardenOne Automower in several gardens Installation Carry out the installation in the following stepsPreparations Installation of the charging station Ideal position of the charging stationImportant Information Installation and connecting the charging station Charging the battery Installation of the boundary wireDo not tread or walk on the charging station plate Best position for the boundary wire Boundaries for the working area Boundaries within the working area Passages when mowing Passages when searching for the charging stationSecondary areas Slopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Charging a discharged battery UseStarting Automower Using the timerUse of SMS function Stopping AutomowerRestart within 20 seconds Switching off AutomowerRestart Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Main switch SelectNumbers Browse between menus Menu functionsMain menu Number seriesInstallation Settings Automower main menuCommands TimerStart time 1 Stop time 1 Start time 2 Stop time 2 Reset all timersYES Mon Tue Wed Thu Fri Sat Sun Run allStart angle 1 InstallationReversing distance End angle 1Passage where the charging station cannot be To follow the boundary wire or a guide wire awayGardens where the front and back are joined by a When this function is activated Automower willProportion DirectionDistance Follow loopCorridor width Test Test OUT Settings PIN code Time lockAlarm SMSTime format Set timeSet date Date formatSounds Sound SignificanceProposed installation and settings Garden exampleExit angles Exit angles 250 Corridor width Garden Example Maintenance BatteryAutomower ServiceWinter storage Charging stationCleaning After winter storageUnderframe and blade disc Chassis Do not use running water when cleaningReplacing the blades WheelsMaintenance Trouble shooting Fault messagesTrouble Shooting Fault symptom Technical data Environmental InformationData Automower 260 ACX EU declaration of conformity EU Declaration of Conformity only applies to Europe115 13

Related manuals

Manual 76 pages 48.62 Kb