Blade Removal

For best results mower blades must be kept sharp. Replace bent or damaged blades.

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and ﬂ at washer securing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

•Reassemble hex bolt, lock washer and ﬂ at washer in exact order as shown.

•Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: Blade bolt is grade 8 heat treated

Für beste Mähergebnisse müssen die Messerbalken immer opti mal geschliffen sein. Wechseln Sie verbogene oder beschädigte Messerbalken sofort aus.

WECHSELN DER MESSERBALKEN:

•Fahren Sie das Mähdeck in die höchste Position, um Zugriff zu den Messerbalken zu bekommen.

•Lösen Sie die Sechskantschraube, die Sicherungss- cheibe und die Unterlegscheibe, die den Messerbalken ﬁ xieren.

•Montieren Sie den neuen bzw. den neu geschärften Messerbalken, wobei die hintere (Hilfschneid-) Kante wie abgebildet nach oben zur Plattform zeigen muß.

WICHTIG: Um eine richtige Montage zu gewährleisten, muß die Zentrierbohrung des Messerbalkens mit der Messerauf- nahme übereinstimmen.

•Montieren Sie nun in der beschriebenen Reihenfolge die Sechskantschraube, die Sicherungsscheibe sowie die Unterlegscheibe.

•Ziehen Sie die Schrauben gut fest (Drehmoment: 27-37 Nm.)

WICHTIG: Die Sechskantschraube des Messerbalkens ist wärmebehandelt.

Pour avoir une bonne qualité de coupe, il est indispensable que les lames soient bien affûtées. Remplacer immédiate- ment les lames endommagées ou tordues.

POUR REMPLACER LES LAMES :

•Relever le carter de coupe au maximum aﬁ n d'avoir ac- cès aux lames.

•Devisser la vis à tête hexagonale avec la rondelle frein et la rondelle plate qui ﬁ xent la lame sur le moyeu.

•Mettre en place la nouvelle lame, ou la lame d'origine réaffûtée, avec le tranchant tourné vers le haut comme indiqué.

ATTENTION : Pour que la lame soit bien montée, l'alésage central en forme d'étoile de la lame doit être parfaitement emboîté sur l'étoile du moyeu.

•Revisser la vis à tête hexagonale avec sa rondelle frein et sa rondelle plate en respectant l'ordre prescrit.

•Serrer la vis avec un couple de serrage de 3,7 à 4,9 mkg.

ATTENTION : La vis de ﬁ xation de la lame a été traitée thermiquement en classe 8, bien respecter le couple de serrage.

Para alcanzar resultados mejores las cuchillas de la sega- dora hay que mantenerlos aﬁ lados. sustituya las cuchillas torcidos y estropeados.

C'MO DESMONTAR LAS CUCHILLAS

•Eleve la segadora hasta su posición más alta para poder alcanzar las cuchillas.

•Desentornille el tornillo de cabeza de seis facetas, la arandela elastica (de resorte) y la arandela plana que sujetan la cuchilla.

•Monte la cuchilla nueva o aﬁ lada con el canto trasero hacia arriba adjunto a la plataforma como indicado.

IMPORTANTE: Para asegurar un montaje correcto el oriﬁ - cio central de la cuchilla hay que ajustarlo a la estrella del mandril.

•Monte otra vez el tornillo de cabeza de seis facetas, la arandela elastica y la arandela plana en sucesion exacta como es indicado.

•Apriete establemente el tornillo (momento de rotacion 27-35 Ft. Lbs.).

IMPORTANTE: El tornillo de la cuchilla es de tratamiento tèrmico-clase 8.

Per avere il migliore risultato di taglio, è necessario che le lame siano ben afﬁ late. Sostituirle se usurate o danneggiate.

RIMOZIONE DELLE LAME

•Sollevare la macchina per avere accesso alle lame.

•Disserrare il bullone a testa esagonale, la rondella elastica e la rondella piatta che ﬁ ssano la lama.

•Montare una nuova lama o una lama con palettaura posteriore rivolta verso il piatto, come indicato.

ATTENZIONE: Per assicurare un buon fissaggio centrale della lama, è necessario che questa combaci perfettamente con il mozzo.

•Montare il nuovo bullone a testa esagonale, la rondella elastica e la rondella piatta nell'ordine esatto, come in- dicato.

•Restringere bene il bullone di bloccaggio della lama (coppia di serraggio: 27-35 ft./lbs)

ATTENZIONE: Il bullone di bloccaggio della lama è stato sottoposto a trattamento termico di classe 8.

Voor de beste resultaten moeten de maaimessen scherp gehouden worden. Vervang gebogen of beschadigde mes- sen.

MES VERWIJDEREN

•Zet de maaier in de hoogste stand om bij de messen te kunnen.

•Verwijder de zeskantbout, de veerring, en vlakke ring die het mes op zijn plaats houden.

•Monteer een nieuw of geslepen mes waarbij het sleep (hulp) mes omhoog naar het maaidek gericht moet zijn, zie afbeelding.

BELANGRIJK:Om zeker te zijn van goede montage moet het centrumgat in het mes passen met de ster op de mandrijn.

•Bevestig de zeskantbout, veerring en vlakke ring weer in precies dezelfde volgorde als op de afbeelding te zien is.

•Haal de bouten stevig aan (aandraaimoment 27-35 ft. lbs.)

BELANGRIJK: De bout van het mes is warmtebehandeld volgens klasse 8.

CTH210xp, CTH150 XP specifications

The Husqvarna CTH150 XP and CTH210 XP are exceptional lawn tractors designed for efficient mowing and robust performance, making them ideal choices for homeowners and small property managers. Known for their innovative technologies and user-friendly features, these models stand out in the crowded market of riding mowers.

The CTH150 XP features a powerful 15 HP Kohler engine, providing ample power for tackling various lawn terrains. With its 42-inch cutting deck, this tractor ensures a wide and efficient cutting path, allowing users to cover more ground in less time. The CTH210 XP, on the other hand, is equipped with an even more robust 21 HP engine, paired with a 46-inch cutting deck, making it suitable for larger properties and tougher mowing conditions.

Both models come with Husqvarna's Pedal-operated transmission system, which allows for seamless speed adjustments while keeping hands free for steering. This feature promotes more control and a smoother mowing experience. Additionally, they incorporate a reinforced cutting deck construction that enhances durability and performance, ensuring that users can rely on their mower for years to come.

One of the standout technologies in both the CTH150 XP and CTH210 XP is the ClearCut™ cutting system. This advanced system delivers superior cutting performance by utilizing a deep deck design that improves grass flow, resulting in a better cut quality and even grass distribution. Users can choose from multiple cutting heights, adjusted easily from the operator's seat, to achieve the desired lawn appearance.

In terms of maintenance, both models are designed with hassle-free access to critical components, making routine checks and servicing straightforward. The large fuel tank allows for extended mowing sessions without frequent refueling stops, a significant advantage for larger lawns.

Comfort is also paramount in the design of the CTH150 XP and CTH210 XP. Featuring ergonomically designed seats, users can enjoy a comfortable ride even during extended mowing sessions. The control panel is strategically placed for easy access to vital functions, and the overall design ensures optimal visibility while mowing, enhancing safety and precision.

In summary, the Husqvarna CTH150 XP and CTH210 XP represent cutting-edge lawn tractor technology, combining powerful engines, durable construction, advanced cutting systems, and user-centric design. These models are perfect for anyone looking to achieve a well-manicured lawn efficiently and comfortably.