Connecting to a Power Source
Charging LED
Before inserting any cables or AC adapter, check the directions and do not insert using force. It may cause breakage of cable or camera.
If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
If you charge the battery with the camera power on, the battery can’t charge fully. Turn the camera off while charging the battery.
| Charging LED |
|
|
Being Charged | Red LED is on |
|
|
Charging is complete | Green LED is on |
|
|
Charging error | Red LED is off or blinking |
|
|
Being discharged | Orange coloured LED is on |
|
|
-If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. The camera may not be turned on because of the low battery capacity. Charge the battery for more than 10 minutes before using the camera.
-Do not use the flash frequently or take a movie with the fully discharged battery charged for a short time. Even if the charger is inserted, the camera power may be turned off because the rechargeable battery is discharged again.
14