Chapter 3. PC software (Multiple Display Control)
Connection
Using the RS-232C cable
The appearance may differ depending on the product.
An
RS232C IN
Monitor1
RS232C OUT
RS232C IN RS232C OUT
RS232C IN | Monitor 2 |
|
Computer
38
Using the ethernet cable
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
The appearance may differ depending on the product.
Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
Computer
RJ45
HUB
Monitor1
Monitor 2