Chapter 5. Menu

Manual Network Setup (Wireless)

Offices may use static IP addresses.

If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.

Getting the Network Connection Values

To view the Network connection values on most Windows computers, follow these steps.

1Right click the Network icon on the bottom right of the screen.

2In the pop-up menu that appears, click Status.

3On the dialog that appears, click the Support tab.

4On the Support Tab, click the Details button. The Network connection values are displayed.

How to set up manually

1Press the MENU button on the remote control.

2Select Network - Open Network Settings.

3Select Wireless.

‒‒ The network function searches for available wireless networks. When done, it displays a list of the available networks.

4Select Stop. The verification process stops.

5Select Add Network.

6Enter the SSID of the network and select Done.

7Select the Security type and select OK. If you select Open, move to step 10.

8If the router has security, enter the password. (Security key or PIN)

9When done, use the button to move the cursor to Done, and then press . The network test screen appears and then the verification process starts.

10When the connection has been verified, select OK.

WPS(PBC)

How to set up using WPS(PBC)

65

1Press the MENU button on the remote control.

2Select Network - Open Network Settings.

3Select Wireless.

‒‒ The network function searches for available wireless networks. When done, it displays a list of the available networks.

4Select Stop. The verification process stops.

5Select Use WPS and press .

6Press the WPS(PBC) button on your routerwithin 2 minutes. Your product automatically acquires all the network setting values it needs and connects to your network.

7The network connection screen appears, and network setup is done.

If your router has a WPS(PBC) button, follow these steps.