Chapter 2. Device setup

AV connection

•Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

•You can connect a video device to the product using a cable. ‒‒ Connecting parts may differ in different products.

‒‒ Press the SOURCE button on the remote control to change the source.

Connection using an HDMI-DVI cable

The appearance may differ depending on the product.

•Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.

•After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the settings as shown below to enable the video and audio from the video device.

‒‒  Sound → set HDMI Sound to AV(HDMI)

‒‒  Picture → set each screen mode to Video/Image under Picture Mode ‒‒  System → General → set HDMI Hot Plug to On

34

• Supported resolutions include 1080p (50/60 Hz), 720p (50/60 Hz), 480p, and 576p.

HDMI1, HDMI2

AUDIO IN

DVI / PC / MAGICINFO IN

HDMI