4.Click OK or Yes.
•If the operating system is Windows 98/ Me, the computer turns off.
•If the operating system is Windows NT, you receive a shutdown message and you must press the power button to turn off the computer.
ACPI(Advanced Configuration and Power Interface) mode
Your computer supports ACPI mode. If your operating system supports ACPI and you want to shut down the computer just by pressing the power button, then follow next steps to set the menu in Power Management Properties. Also see “Using Power Management Options” on page 77 and the documentation accompanying your operating system.
To set the menu;
1.Select Power Management Properties in Control Panel.
2.Select the operations of power button.
•Suspend mode: operates as Save to RAM mode. (See ”Suspend Mode” on page 78 for more information.)
•Hibernate mode: operates as Save To Disk mode. Set Hibernate submenu to enabled to use Hibernate mode. (See ”Suspend Mode” on page 78 for more information.)
If the system does not power off, then press and hold the power button for over 4 seconds.
Restarting Your Computer
You may need to restart (reboot) your computer when installing hardware or software or if the computer does not respond to your input. A warm (or soft) boot prompts you to save your files, turns off the computer, and then restarts the computer. A cold boot turns off the computer without saving your files.
To perform a warm (or soft) boot:
1.Click Start on the taskbar.
2.Click Shut Down.
8 Using Your Computer for the First Time