drivers are located or click the Browse button and locate driver you want to install. Click the OK button.

"D:\NT4\Drivers\Video".

Figure 22. Enter location of the driver files

8.A line similar to the following line appears under the Display option: S3. Savage IX.

9.Click OK. The Third-Party Drivers warning window appears.

10.Click Yes. The driver is copied. A window appears telling you the driver has been successfully copied.

11.Click OK. Remove the disk from the floppy drive. Close the open windows on the screen.

12.Click Yes when prompted to restart the computer. As the computer restarts, select Windows NT Workstation Version 4.00 as the operating system and press <Enter>.

13.Log on as supervisor. The Invalid Display Settings window appears.

14.Click the OK button. Click the Test button at the Display Properties window and follow any directions on the screen to finish setting the display properties.

Windows 2000

You can use two different method to install video driver.

1st Method;

1.Click on the Start button and the Start menu appears.

90 Video Features and Configuration