Installing Modem Driver in Windows NT 4.0 (Modem/LAN Module Driver)
You can install the modem driver as shown in the following.
The figures illustrated in this manual may not be identical as those on your system. The figures in this manual were developed using the SENS LT56IDW Modem installation as reference.
At the BIOS setup, Installed OS must be set as "Other/NT4.0". When you install the driver or remove the driver, you must log in as Administrator.
In order to install your modem driver, you must remove the existing modem driver first.
Remove Existing Modem Driver
1.Insert the CD or floppy diskette that has the modem driver on it.
2.Click the Start button, and then click Run. Locate the directory that contain the modem driver and run SETUP.EXE. (In this manual, "D" refers to the CD- ROM drive.)
"D:\NT4\Drivers\Modem\Setup.exe"
3.Click the Next button when the Modem Installation dialog appears.
4.Select Remove existing modem driver and component and click the Next button when the Select Components dialog appears.
5.The UnInstall Complete dialog appears when the existing modem driver is removed successfully. In order to complete the driver removal, you must restart the system. Select Yes, I want to restart my computer now and click the Finish button.
Install the Modem Driver
1.Insert the CD or floppy diskette that has the modem driver on it.
2.Click the Start button, and then click Run. Locate the directory that contain the modem driver and run SETUP.EXE.
Using the Modem 53