( In this manual "D" refers to the CD-ROM drive.) "D:\NT4\Drivers\Modem\Setup.exe".

3.Click the Next button when the Modem Installation dialog appears.

4.Select Install new modem driver and components and click the Next button when the Select Components dialog appears.

5.The Setup Complete dialog appears when the modem driver is installed successfully. In order to complete the driver installation, you must restart the system. Select Yes, I want to restart my computer now and click the Finish button.

Modem driver installation confirmation and country selection.

After the modem driver is installed, you can check if the modem driver is installed properly.

If the country is not selected correctly at th I am in this country/region of the Dialing Properties dialog, the modem may not work properly. So, you must check if the country you're calling from is selected appropriately and then use the modem. If your modem only supports Domestic, you must select the country where you bought your notebook computer. And, if you use the modem in other countries, your modem may not work properly. If your modem supports Worldwide, please check with your local distributor which countries can be supported by the SENS modem.

1.Click the Start button, point to Settings, and then click Control Panel.

2. Double-click the Mode icon.

3.Check if the modem is attached to the communications port correctly and click the Dialing Properties button.

4.At the Dialing Properties dialog, select the correct country at the I am in ~ list box.

5.You must restart the system, for your settings to take effect.

54 Using the Modem